Avid extroverts

[snowboatboy]

I am putting the avid extros on my 07 d6 and was wondering if there is any thing that I should know before I do? I am putting an anti stab on, but is there anything else worth doing as well?

 

[Robbie]

Avid extros

Make sure they look like this.

 

[snowboatboy]

What do you mean "look like this", how it's set up, or what?

 

[NapaMatt]

Pretty simple..

Cut your rails put on anti Stab kit..

Go to the press and press off old.. press on New!

Fill chain case..


RIP!

 

[Robbie]

Avid extros

The picture shows how the rail tips should look after cutting and anti-stab installed.

 

[snowboatboy]

I got my drivers today and I must say that they look great. But I was curious if one of them would only have the splined edges halfway through, because of how the edges on the drive shaft only seem to line up with the rail, or does it not matter? Thanks

 

[sledking]

The one driver will have the splines only half way because if you look at your driveshaft it doesnt have splines all the way to the end. For the driver to go on far enough to be in line with the windows of the track and rails it needs to go further down the shaft past where the splines end. Hope this helps!

 

[snowboatboy]

Yes thanks sledking. Talked to Robbie and he said he just forgot to machine out the inside of one.

 

[richracer1]

Here's a few pic of my sled with Avids, anti-stab and trimmed IceAge rails. I hope this helps.