Are these shot??

[sno_mo_racer]

I agree with Z-man, the xmembers only seemed to be an issue with the compfusion mounts, that is the only reason I can see the billet xmember was made for the damage the compfusion mounts were doing to them. I only use stock mounts and never had a problem with the xmember, still have the stock bolts no need to upgrade to heavier bolts as the xmember cannot be torqued any tighter.

 

[High Velocity]

sno-mo, the reason I went with the L-9 bolts, is that the gr 8 bolts in the front mounts broke. Had no issues with the L-9's.

 

[m8magicandmystery]

sometimes a grade 5 is a good bolt in many applications...not as brittle as a grade 8

 

[sno_mo_racer]

sno-mo, the reason I went with the L-9 bolts, is that the gr 8 bolts in the front mounts broke. Had no issues with the L-9's.

Yeah but that is with the billet xmember. I was referring to the stock one.

 

[ttreewalkerr]

Has anyone tried to remove and inspect the PTO side rear mount without pulling motor ?

 

[jsledder]

I would think you would be able to remove the big washer and look for tearing of the mount without actually removing it. If not, it wouldn't be much of an issue to take both rear motor mount bolts out and one on each side of the front and tilt the motor ahead to get it out.

 

[ttreewalkerr]

I did do that already and it looks fine from outside..
Just when i installed these compfusion fronts, when i fired up sled the engine held quite good,, now after 400 miles the rear PTO side seems to shake more. i can see the bolt moving w/ engine movment now... Just wonderin if its tore on inside face,, or when broke in do these dance more ?
it is definetly fine from outside view,, i removed the bolt and plate to inspect.

I would think you would be able to remove the big washer and look for tearing of the mount without actually removing it. If not, it wouldn't be much of an issue to take both rear motor mount bolts out and one on each side of the front and tilt the motor ahead to get it out.

 

[CompFusion]

Hey guys, sorry I havent had a lot of time lately to get on here but I'm going to send the pics to the company that manufactures these pucks for me and see if they have any insight. I haven't heard from anyone with an issue for a long time so I will try and get things ironed out.

 

[jsledder]

Any news...

 

[ttreewalkerr]

News,, I sold my 9 ....

 

[Z-Man]

Rode mine 9 more days with them falling apart. No blown belts. Pro I was riding with had strings coming out of his mine looks fine. Afraid to look at motormounts now...

 

[ttreewalkerr]

Good luck,, Treewalker- out !

Rode mine 9 more days with them falling apart. No blown belts. Pro I was riding with had strings coming out of his mine looks fine. Afraid to look at motormounts now...

 

[02sedona]

I'm in need of some new urethane blocks. Are they available? Compfusion you pm box is full.

 

[Z-Man]

Send email to Colin at compedgex@hotmail.com

Please let us know if he responds and the cost.

 

[02sedona]

Colin has been very fast to respond about his mounts. He still has them for sale. It was $67 Canadian for the replacement pucks shipped. Seems fair.