Better yet you can try both sleds and we usually have a set of each in the trailer for you to take home.
Alternative Impact 36'' a arms
- Thread starter alt
- Start date
Sorry guys, difficult time of the year to stay up on threads, but just wanted to remind you that these arms "ALL" do come with the sway bar tabs and the bar is a must. I can go into greater detail if need be, but just wanted to clear the air as through phone conversations that seems to be a popular question. Thanks!
Dan
Dan
For the guys that have ordered this kit: Seems by pure accident through phone and email conversations I discovered some guys have not noticed the install instructions. I think they are getting tossed with the packing paper, but any who following the set up procedure is VITAL on this kit. We are now putting them in the bag with all the hardware. My fault I should have done that from the start. I do not send install instructions with my other kits due to the ease of it, but again, very important on the 36''. For those of you that have done set up not knowing, please contact me and I can email them. Thanks guys, its going to be a great season!
Dan
Dan
Dan,
You might want to post up the install instructions here... You can put up some pretty large PDF files on the forums here.
You might want to post up the install instructions here... You can put up some pretty large PDF files on the forums here.
J
jwentzer
Well-known member
Does anyone have experience with the Alt Impact 36" while using the Zbros shocks that are set up for the Zbros 36" kit? Curious if the 16.325" works well with Alt Impact...too short, just right, ride height too short in front...etc.
Curious on your thoughts or experience with this setup.
Curious on your thoughts or experience with this setup.
I think we talked on the phone. Sorry I have really no experience with the zbros stuff. The uppers on mine are a nice open arm that will accept any shock with any resi that we have installed. The shock length I recommend is 16.625. Ken from Mountain Magic in Edmonton has several of my kits and uses the Skidoo ifs shocks that are 16.5''. Sounds like the shocks your wondering about are only about 1/8'' from what kens using. Might be worth calling him he has been there done it, but zbros shocks, just not sure. I can round up his # if you need it. Thanks!
Dan
Last edited:
Looks like 1.52# savings.
Similar threads
