Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

  • Don't miss out on all the fun! Register on our forums to post and have added features! Membership levels include a FREE membership tier.

AFTERMARKET 2013-2015 pro rmk 800 fuel filter INFO/PART #'s

Can I use these filters even though I run Av gas? I heard it will eat apart the aftermarkets?

I have no knowledge on this. Being these filters are SPI I wouldn't be surprised if they are from the same supplier as the Polaris ones. I really don't know about the AV gas. Sorry.
 
Race gas seems to be the death rattle for these...BUT... not all race gas.

I soaked one in VP110 and one in 100LL AvGas... the VP softened the adhesive on the filter... the AvGas... nothing.

Also.. the old filters back in 2006 or so, didn't seem to have this problem.

Race gas has strong solvents in it like Toluene etc. that will soften a lot rubbers/plastics/adhesives.

Octane boosters are the worst it seems on the filters LOTS of toluene in there.

Funny, on the 2015 AXYS sleds... no external fuel filter... the pickup sock in the tank is the only filter.



.
 
Looks like we have this one listed for the 11-12 and is in stock. The 12-14 is out of stock right now.

http://www.gobigparts.com/SPI-FUEL-LINE-W-FILTER-120333.html

12-0165_12-0165-229.jpg

http://www.gobigparts.com/SPI-FUEL-LINE-W-FILTER-120333.html

We currently have these 2011-2012 in stock. But the 2013-and newer are showing a due date of 10-30-14 so we are getting closer.

2013 and newer.
http://www.gobigparts.com/SPI-FUEL-LINE-W-FILTER-121717.html
 
Gobigparts would you recommend that I order one now, or wait until they are in stock?

Well your chances of getting one sooner are much improved because one will have your name on it. I hope this helps. I just fixed this item so I can now be ordered under backorder.

Thanks
Randy
 
Last edited:
Any word on when the 13 filters will be available?


Sent from my iPhone using Tapatalk
14 570LE BlueFire
 
Race gas seems to be the death rattle for these...BUT... not all race gas.

I soaked one in VP110 and one in 100LL AvGas... the VP softened the adhesive on the filter... the AvGas... nothing.

Also.. the old filters back in 2006 or so, didn't seem to have this problem.

Race gas has strong solvents in it like Toluene etc. that will soften a lot rubbers/plastics/adhesives.

Octane boosters are the worst it seems on the filters LOTS of toluene in there.

Funny, on the 2015 AXYS sleds... no external fuel filter... the pickup sock in the tank is the only filter.



.

MH

Is that for the SPI and aftermarket filters? How do the Poo filters fair with VP 110?
 
Thats a good question for GoBig or jsledder on the SPI filters.

GoBig or jsledder...Want to test two "for the Cause"???
Cut them open, remove the filter element, Soak one in full 110 race fuel and the other in 100LL-AVgas??




.
 
Last edited:
CreekChub, as I said... the VP110 softened the adhesive that holds the filter together.

I'm going to open up a used 2014 stock filter that was used for 200 miles with 10%-ethanol pump-fuel... dry it out, and soak it in VP 110 for a week to see what happens.


.
 
Randy... I get that they are SPI branded/packaged...

Are you willing to do the test on them in race fuel?

THX,
MH



.
 
Randy... I get that they are SPI branded/packaged...

Are you willing to do the test on them in race fuel?

THX,
MH



.
This is a possibility. I dont run race gas but the guy that owns the camp we ride out of does. I could bring one up first trip up. Or possible source soke fuel around here.
 
If you want to send me one of the SPI's from the current run...
I'll test soak it in Race Fuel ..It will get opened up (destroyed) and the element removed for the test though.

Would be best if it is current production run.

I have VP110 and Sunoco110 at my disposal.



.
 
If you want to send me one of the SPI's from the current run...
I'll test soak it in Race Fuel ..It will get opened up (destroyed) and the element removed for the test though.

Would be best if it is current production run.

I have VP110 and Sunoco110 at my disposal.



.
Pm me your address.
 
Premium Features



Back
Top