Actual add on turbo weight

[huhner5]

I run 3psi at sea level with my silber.. on straight 91 non-oxy.. no other enigne mods.. never det once in the 100 miles I put on last season

 

[jeffthebuilder007]

turbo kit true weights

I installed a MTNTK turbo on my '16 Axys last year. Even after removing the stock muffler and other small stock stuff it still added at least 35 lbs. to the sled (the additional 1 gallon of coolant held in the 5' tunnel cooler and innercooler was 8 lbs. of that weight). Install was a bit complicated and very time consuming. Took me more that twice the time to install vs. installing a Boondocker turbo my '15 Pro Rmk (14 hours Bd, 34 hours MTNTK).

Power was great, throttle response best of 3 turbos I have had to date, but it was hard to start in high elevations, and to me the added weight was very noticeable and made it not as playful so I went back to stock.

 

[sumtinwong]

yea that's a lot of weight to add I would have never guessed that much does any one have a BD weight

 

[Staple_STI]

yea that's a lot of weight to add I would have never guessed that much does any one have a BD weight

Basekit (no additional injectors, no intercooler, etc.) was about 10-11 lbs of added weight over 100% stock