9R Build - high compression head with twins, billet throttle bodies and injector re-locate

[Reddragon800]

This is a left over 2023 Pro RMK 165

Installing a race package from upshift403.

Includes a 14.5 head
SLP outlaw twin pipes
Billet throttle bodies
Injectors relocated to the throttle bodies
206hp at 8144 rpm

I’m also cut and clipped an Alpha 165 3” track to fit on the Polaris skid. Cariboux hood and P-85 conversion. Added some Elka stage 5’s as well.

 

[underpressure]

Bad ass, that 9r is going to rip. I'm surprised the pipes peaked so low, better for clutching for sure.

 

[goforbroke]

What elevation do you ride? I have seen problems - or maybe inconsistency with the twin pipe with the 850, how are they for the 9R.

As more go off warranty, be fun to see more of these builds. Nice job.

 

[Visi]

What size are the throttle bodies and have they tried them on a boost?

 

[Reddragon800]

What size are the throttle bodies and have they tried them on a boost?

I forget the size, but im not sure if they will fit on the boost.

 

[Reddragon800]

What elevation do you ride? I have seen problems - or maybe inconsistency with the twin pipe with the 850, how are they for the 9R.

As more go off warranty, be fun to see more of these builds. Nice job.

I ride at 5500-7000'.

 

[Reddragon800]

Forgot to mention that this is a straight Av gas tune. Ill have videos in the next 2 weeks.

 

[Reddragon800]

Alpha track is on

 

[Reddragon800]

 

[turboless terry]

Do you think that track works better than 325?

 

[boondocker97]

How much work was it to punch the track windows?

 

[Reddragon800]

How much work was it to punch the track windows?

Took about 6.5 hours to complete the job. Would go faster now after learning a bit on this first one. Could probably do it in 5 hrs.

 

[Pickin’ Boogers]

That video looks great! Any issues at low to mid RPMs? I assume they have a pump gas head also, but their website is under construction. Could be a summer project for my out-of-warranty 9r.

 

[Reddragon800]

That video looks great! Any issues at low to mid RPMs? I assume they have a pump gas head also, but their website is under construction. Could be a summer project for my out-of-warranty 9r.

They do have a pump gas set up as well.

 

[madmax]

Took about 6.5 hours to complete the job. Would go faster now after learning a bit on this first one. Could probably do it in 5 hrs.

How did you punch out the windows on the alpha track?. I’ve done it before, wasn’t pretty and took quite a while. There’s got to be an easier way.
Also what’s the benefit of the new throttle body and relocated injectors?