I had tri city polaris order the shocks and a arms new and had tri city put them on before i ever took possession of the sled, they are set up for my weight.
39" Z bros front spring rate with z bros arms w/o sway bar
- Thread starter Kcjepperson
- Start date
R
rubbersidedown
Member
Hey kc, I run the x1's and was having similar issues. I moved the clip down to the 7th ring and upped the nitrogen to 250# up from 200. I noticed a big difference. I have the dial's set right in the middle now.
I had a good weekend of fine tuning my suspension, I have the fronts really close to how I think it should feel. I like the suspension to be a little on the form side. I had 250 psi out in the front shocks, connected the sway bar back up and am running the retainer on the 6th ring. I am going to try the 4&5 rings just to see if I like them better. I am pretty happy now with how the front suspension is handling. On the rear suspension I tightened the front shock up quite a bit and that seem to help with the sled ski pressure quite a not as well as the rear shock a little bit. I find that I am bottoming out on any decent jump though. I think I will get me some shocks ordered for the rear skid with some double/triple rate springs. I running exit shocks on the front. I really like those, but have read a lot about people running the raptors, or Fox shocks. And advice on what you are running and how they perform would be appreciated.
Similar threads
