2022 Boost: must do mods & DIY fixes

[grizzslayer]

I didn't realize these had an additional filter. I thought the only filtering was done by the frogskinz, hence my concern about air gaps in certain spots. If thats truly just for snow prevention, how its installed now shouldnt be much of an issue

The foam is on the side vents. Snow ingest from the BD intake will not go through the foam.

 

[JH@CM]

The foam is on the side vents. Snow ingest from the BD intake will not go through the foam.

Have a look at the matryx parts schematic. There are no filters on the side vents.

 

[RFleck17105]

I believe in 23 they changed throttle bodies and air box. Not sure on specifics but that could be a reason why people say the 22 doesn’t come close to the 23s snd 24s.

 

[greasemonkey3406]

It’s a dual rate 75/150#.
On everyone of my stock sleds the 75# side was always coil bound. The 165 length suspension puts more pressure on the FTS spring than a 155.
For comparison, the RMSHA sleds are a 155 length and are fitted with a straight 150#.
We have had better results, in our back country 165 sleds, with 160 and 170# FTS springs. They make the front end feel lighter.

Hey Tony, can you pm me with info about these springs?

 

[Eatstone]

Hey Tony, can you pm me with info about these springs?

I talked with Tony and he’s sent me the 170# spring to try this year!