Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
I rode with a bunch of the guys from Timbersled on the new stuff in February and I can confirm that A LOT of the talk on this thread is wild speculation. As far as I can see, no one here really knows a whole lot about what's going on behind the scenes with Polaris/Timbersled and why/what they are developing.
Bottom line is that the new suspensions are awesome. The ski is 11.5 now which is a huge plus in my book. Track was narrowed to 11.5 for more track speed as well as handling as I understand it. Being from Utah where the snow is deep, I am suspicious of narrowing the track. Perhaps it's better but I am in the "more floation" camp rather than "track speed" camp right now.
These Timbersled guys are still developing this stuff in northern Idaho and it was a pleasure to meet and hang out with them for a few days. Great guys. If you don't really know what they are up to, you make yourself look a little foolish by writing statements that are nothing more than speculation. Don't get me wrong, speculation is great, just don't write it like it's a fact.
[QUOTE
What happened to the built in gas can holder.....grab your bungee straps
Were not building snowmobilesWhen someone says a narrower track and steeper approach angle and will work better in the deep they simply need to sober up. Simply not the case and discredits their product in my opinion. All long time sled builders know this and been proven.
If your track speed on the throttle is 30 mph the paddle tips at the driver are moving at 60 because is rolling around a radius. the belt may be 30 but out at the paddle tip is accelerated, that snow is pulled downward and compressed . The higher axle will handle bumps better and the narrow track will get from edge to edge quicker butt it will not float better.Were not building snowmobiles
I think the biggest reason you will see these working better is no that a steeper approach is necasarily better. But you take a small loss to overcome something for a larger gain. In the current trim (17 and older) yes, the approach is better, BUT, the paddles as they return around the drivers are actually pushing backwards for a second and trenching the setup in. You are comparing driveshaft location and attack angle on a sled, BUT on ALL snowmobile designs the centerline of the driveshaft is never below the belly pan.
Snow acts almost like a liquid in many senses and before we were sort of cavitating the front of the drive system. So although yes a steeper approach angle may be less ideal. given our packaging restrains, a slightly higher approach angle to eliminate this big drag will still net a far better result.
The higher axle will handle bumps better and the narrow track will get from edge to edge quicker butt it will not float better.
the dealer I got mine from contacted timbersled and was told that the picture is wrong and that the rails are blue. i hope that true. defiantly to much white.