2016 Pro RMK Track Speeds

[Sheetmetalfab]

What is your clutch setup?

Buy it from chad.
he posted below.


I had to run in ethanol mode to not overev.
Adding a gram to the tip before the next ride.

Rpm sits rock steady at 8400 and 45 mph.
It's almost twice the ground speed as a clutched/geared/modded 163 pro.

https://vimeo.com/149244367

Today.
My brother (setup identical)


Sent from my iPhone using Tapatalk

 

[IQRIDR]

We have a lot of time testing our kits. The Axys kit posts the most impressive we have achieved via clutching only on any sled, period.

Stock sleds will see 42-45 mph and piped sleds will see 43-47. Snow conditions are subjective and is like comparing apples to oranges on the mountain but these are the results from 2-7.5k elevation in a few feet of powder.

 

[snobyrd]

Can you set me up with a kit minus the adj weights, iv already got bikeman and slp adj weights, and not really wanting another set of weights? If so what would the cost be?
Tks

 

[snobyrd]

Buy it from chad.
he posted below.


I had to run in ethanol mode to not overev.
Adding a gram to the tip before the next ride.

Rpm sits rock steady at 8400 and 45 mph.
It's almost twice the ground speed as a clutched/geared/modded 163 pro.

https://vimeo.com/149244367

Today.
My brother (setup identical)


Sent from my iPhone using Tapatalk

Your piped eh?

 

[Sheetmetalfab]

Your piped eh?

With how good it works.....
Its the new (stockish) benchmark.
Price vs gain is an easy decision.
Chad will sell you a pipe too.
Easiest mod sled on the planet.

 

[2005 1m]

163 x 2.6. Bone stock other than a Diamond S Quiet can. 62 gram (stock) weights. Through the initial engine & belts break-in (7hrs on motor I believe). At 10,000 ft, in 3-4ft of over the hood, dry, bottomless powder yesterday I could only get 8,050 rpm and 38-39mph of track speed on a climb.

Anyone have a similar sled at a similar elevation, with clutching that is working well? I'm leaning towards giving Carl's a call.

 

[IQRIDR]

Can you set me up with a kit minus the adj weights, iv already got bikeman and slp adj weights, and not really wanting another set of weights? If so what would the cost be?
Tks

Yes we can, cost would be $175. We don't like to separate the components, you will need to use the SLP weights to get the results posted. I like the BMP weights, I just havent tested this setup with them and the kit price would go to $395 instead of $275 if we use the BMP over the SLP. The BMP is certainly easier to adjust, just double the price.

 

[wisboy25]

A2d kit

Yes we can, cost would be $175. We don't like to separate the components, you will need to use the SLP weights to get the results posted. I like the BMP weights, I just havent tested this setup with them and the kit price would go to $395 instead of $275 if we use the BMP over the SLP. The BMP is certainly easier to adjust, just double the price.

Chad I pmed u last night if I order it online from you does if come with everything I would need and what kind of shipping time to 54768

 

[snobyrd]

Yes we can, cost would be $175. We don't like to separate the components, you will need to use the SLP weights to get the results posted. I like the BMP weights, I just havent tested this setup with them and the kit price would go to $395 instead of $275 if we use the BMP over the SLP. The BMP is certainly easier to adjust, just double the price.

Chad, does your kit use 68 grm or 71grm slp weights at 4000 feet?

 

[IQRIDR]

Chad I pmed u last night if I order it online from you does if come with everything I would need and what kind of shipping time to 54768

Sorry, currently trying to catch up on emails, phone calls and PM's. Very busy.

It comes with SLP MTX weights, primary and secondary springs, helix, derlin washer 3-pack. $275 is the price, shipping is $12 to anywhere in the US, $20 to Canada. Would ship tomorrow, takes 2-4 days to arrive via USPS Priority mail.

 

[IQRIDR]

Chad, does your kit use 68 grm or 71grm slp weights at 4000 feet?

71g base for 4000 feet.

 

[snobyrd]

Ttt

 

[snobyrd]

71g base for 4000 feet.

Chad, i got your kit, at 4000 feet stock,should i run the 40 or 42 side?

 

[Sheetmetalfab]

Chad, i got your kit, at 4000 feet stock,should i run the 40 or 42 side?

42.


Sent from my iPhone using Tapatalk