I'm finally getting a boost gauge installed on my sled, never had issues with the setup stock but wanted to see what I'm getting and will likely be going to do the Evo upgrade.
Question is there is a little nipple coming off the stock MPI airbox that has a little black plug on it. It is just above the turbo side intake tube. Can I just use that for my gauge and not worry about adding a tee down low and then worry about keeping the pressure tube to the gauge out of the way of all the heat. I figured this location should also give me the most accurate reading since it is right off the airbox before it goes into the throttle bodies.
Thanks
Question is there is a little nipple coming off the stock MPI airbox that has a little black plug on it. It is just above the turbo side intake tube. Can I just use that for my gauge and not worry about adding a tee down low and then worry about keeping the pressure tube to the gauge out of the way of all the heat. I figured this location should also give me the most accurate reading since it is right off the airbox before it goes into the throttle bodies.
Thanks