clutch

I just bought a 09 dragon 800 with about 750 miles on the fully rebuilt engine and a new team clutch. I have only been able to get out and ride once since I picked it up. When I was out riding I noticed that when i got into the 6000-8000 rpm range it would just take off, it felt like it hit a...

Read through lots of posts on what to do, but its all from 2011. I'm looking for some updated info and what has worked for a couple years! Right now the sled is completely stock (never even changed plugs and only on the second belt) w/ 1500 miles. Right away I'm not looking to dump all the much...

I've searched and not found any info on this. I'm looking at going to Cooke City, MT (elevation ~7,000-11,000 ft I believe). I'm wondering what I need to change from stock? Gears? Weights? Springs? Thanks in advance!

My 9 started to act up like the drivers were worn, little bit of skipping when it moves, so i checked the drivers and they look perfectly fine. THEN, got back to the truck and it felt like the belt was slipping, rev but no track movement! Belt and clutches bone dry, checked the chaincase, all...

Team Industries Secondary Clutch for a Rev 800 HO 04-07 Great shape $175/BO shipped 763-286-0124, Bill

I ride trail, i noticed a ratcheting sound 4 rides ago once per ride. I thought it was ice under the tunnel cause once i got going it went away and didn't happen again. Well this weekend i heard it again,, but every stop sign i heard it consistantly,, then going up a inclided hill i...

Hey! I am completly unfamiliare with clutch-kits and i was wondering if you guys could help me out a bit. What do i want to buy for my sled with a 151" long and 2" lugs track? got a 800 H.O from 2003 in it Do you have any recommendations for someone that set up these kits for you?

So I just got a 2007 M8 and the guy took the boondocker box off before he sold it to me so I had to buy one and start from scratch. I went riding and was trying to play with it and of course the fuse for the guages blew so I couldnt use them, but I checked the max RPM the sled got to and it was...

I need help tuning my boondocker box and adjusting my clutch springs/weights. I need numbers for the boondocker box and weights/springs. Sled:2007 M8 Mods: RK-tek Head, porting, boondocker control box, speedwerx pipe, can, y pipe, boysen reeds, and BDX intake. Elevation trying to tune at:3500ft...

Quantity Part Number Fits Throttle Cables 1 7080157 1976-1978 Colt 1 7080178 1976-1979 TX 1 7080159 1975 TX 250 &340 1 7080159 Electra 440 1 7080192 77-79 TXL 1 7080197 Cobra 1 7080059 70-71 488 Mustang & Charger 1 7080208 1979 Apollo 1...

looking for a 91-93 exciter clutch

I am having issues maintaining rpm on my 2008 146 summit xp with 860. it will get to 8200 rpm then falls down to 7800 give or take a few (once in awhile while changing settings would go even lower) when i am getting into the hill climbing. I have a factory secondary with violet violet skidoo...

So i went riding and it was running great as usual then i heard the belt starting to go, belts cords slapping.. so i stopped and sure enough it was starting to go out. i changed the belt and now its acts as if its binding. I am not very familiar with the clutches at all. i usually sand the...

Looking to get rid of a primary and secondary off of a 2011 pro rmk. Both have approx 4k miles on them and work fine but could benefit from a rebuild. Pretty average wear for the miles. Price is more than cheap enough to rebuild and come out way ahead of buying new. Weights not included on the...

2009 Summit XP stock secondary clutch with jack shaft 8,000' $250.00 Bill located in Mpls, MN

Rev Summit Parts - Pair of stock 2005 Rev skis with carbides - $100 - Stock reeds, good shape - $50 - 2 wheel kit with stock wheels - $50 - Skid plate with A arm protectors - $25 - Stock drop brackets - $25 - Stock secondary clutch - $250 Located in Mpls, MN

This is a factory Cat alignment tool that I bought for my 2009 M1000. Offset is 1.655, per the direction of Michelle at Oregon Trail. I received it and thought it would be pretty obvious to figure out, but I’m just not sure what the correct way of using it is! I feel pretty dumb starting a...

Team Clutch with Helix. Helix in Clutch is 62-48-46-ER 62-46-46-ER Extra Helix is: 64-42-36-ER Clutch came off a 2004 Rev 800 $200 for Clutch and installed Helix plus $20 shipping. Extra Helix $70 plus $10 shipping. Buy the entire set up for $250 plus $20 shipping. Shipping is to...

Part number 12? clutch side shaft on crank Up at the top of Baker my crank breaks just behind the primary clutch. This is where my Crank broke, climb up to top of Mt. Baker. I believe its part number 12 (3007-265).The motor did shake at idle but smoothed out under...

Doing some spring cleaning. I have a P-85 button secondary, the buttons have recently been replaced and it comes with a SLP mountain Helix. It has a 1' keyed shaft so it will fit many years. I'll clean the clutch and make sure it's good to go before I ship it. Would love to get $100 for it...