Selling my 2018 M8000 Mountain Cat 153 3". The sled is in great condition with 1099 miles and lots of extras. Sled will be sold with 3 extra clutch belts, a BCA Tunnel bag and the following parts which are on the sled.
TKI Belt drive with extra belt
TKI Billet big wheel kit
BMFab running boards
BMFab tunnel brace/rear bumper
2019 Arctic Cat skis (big upgrade over the 18' skis)
2019 Brake lever and reservoir
Front shocks have been upgraded to EVOLS
Rear track shock has been upgraded to EVOL
Arctic Cat aftermarket front bumper
SSI Stage 1 kit (Jaws pipe, Jaws Y-pipe, SSI lightweight can, SSI secondary helix, SSI secondary spring, SSI primary spring, SSI Adjustable weights, ECM reflashed so no fuel controller to deal with)
Boyesen reeds installed less than 100 miles ago
Handlebar cleanup kit
CFR 4" Purple riser
CFR Green backcountry bars
CFR purple grips
RSI handwarmers
Octane Ink wrap
New voltage regulator installed less than 100 miles ago
Air intake has been siliconed to insure no water gets sucked in
Some additional powder coating
Shaved 1" of the top of seat foam off for slightly lower than factory seat
I'm sure I'm missing a few things but this sled is very set up, runs like a top and has been well maintained. No missing lugs on the track, everything is clean and straight. Sled is located in Bozeman, Montana and I'm willing to help with delivery within reason. Asking 8500.00 USD OBO Please call or Text Trenton @ 406599-9964 if interested or have any questions
TKI Belt drive with extra belt
TKI Billet big wheel kit
BMFab running boards
BMFab tunnel brace/rear bumper
2019 Arctic Cat skis (big upgrade over the 18' skis)
2019 Brake lever and reservoir
Front shocks have been upgraded to EVOLS
Rear track shock has been upgraded to EVOL
Arctic Cat aftermarket front bumper
SSI Stage 1 kit (Jaws pipe, Jaws Y-pipe, SSI lightweight can, SSI secondary helix, SSI secondary spring, SSI primary spring, SSI Adjustable weights, ECM reflashed so no fuel controller to deal with)
Boyesen reeds installed less than 100 miles ago
Handlebar cleanup kit
CFR 4" Purple riser
CFR Green backcountry bars
CFR purple grips
RSI handwarmers
Octane Ink wrap
New voltage regulator installed less than 100 miles ago
Air intake has been siliconed to insure no water gets sucked in
Some additional powder coating
Shaved 1" of the top of seat foam off for slightly lower than factory seat
I'm sure I'm missing a few things but this sled is very set up, runs like a top and has been well maintained. No missing lugs on the track, everything is clean and straight. Sled is located in Bozeman, Montana and I'm willing to help with delivery within reason. Asking 8500.00 USD OBO Please call or Text Trenton @ 406599-9964 if interested or have any questions
