$9000 2013 KTM 300 / 2016 TS/TSS SX120 package "Fastest Boondocking Bike"
Hi guys. I have really enjoyed this package but time for other things. This was one of the first KTM 300 bikes customized by Randy Siemens a few years back. Bike was purchased new with the express purpose of being a snowbike, but it also rocks on trails as anyone with a KTM 300 can attest. Here is Snowest link to the build:
https://www.snowest.com/forum/showthread.php?t=354425
2013 KTM 300XC - 300SX Head, 180psi - Cylinder porting; port and polish - SX CDI Box - PC Platinum-2 exhaust system - E-Line Carbon Fiber Pipe Guard - KTM "red" power valve exhaust spring - V-Force 4 Reed Block - APT Cast 38MM Smart Carb as well as 30MM billet Smart Carb (both carbs come with the bike but I have gone back to stock carb) - Custom Neoprene Carb Jacket - Avid Carb Heat System - Custom clean air intake system - Rekluse Core EXP Clutch - Fastway/Pro Moto, Adventure Pegs, Risers and Guards - Moose Racing Grip Heaters (not currently hooked up) - Cyclops 610 Headlight (best on market) - UFO Plastics - Graphics - Giant Loop Wind Guards for hands - Seat Concepts Seat - will include as many OEM parts as I can find (OEM pipe, clutch, manual, 1 complete set of new plastics, etc.) as well as front and rear wheels, swingarm etc. Probably a few extras I am forgetting.
And here's link to Randy's "shakedown" test ride of the bike: https://www.youtube.com/watch?v=YK1m2wbGLZU
I would like to run it to a dealer to get a reading (?) on total hours, I would estimate less than 75? We got more into the 450 MX bikes a few years after this bike was built and honestly have only run it a few hours the past 2 seasons. It is a lot of fun and carries good track speed.
Current bike market says the bike alone with mods is conservatively worth $5500. $9000 buys it, over $17,000 invested in it.
I'm in southern Idaho and selling it to fund a semester or two of school. Asking a fair price including 2 SmartCarbs. NOTE: Yeti wheel kit in picture NOT included in sale; small tool box and 3.3 gallon Mt. Addiction jug are both included. Bike plastics look 4 years old....because they are. Top tunnel section of TS kit in rear isn't pretty, has had a couple of bags on it. That top piece could stand to be replaced.
Alan 208-316-0629 Please no trades, Johnny Cash Talks. Pix are not the best but should get you started.

Hi guys. I have really enjoyed this package but time for other things. This was one of the first KTM 300 bikes customized by Randy Siemens a few years back. Bike was purchased new with the express purpose of being a snowbike, but it also rocks on trails as anyone with a KTM 300 can attest. Here is Snowest link to the build:
https://www.snowest.com/forum/showthread.php?t=354425
2013 KTM 300XC - 300SX Head, 180psi - Cylinder porting; port and polish - SX CDI Box - PC Platinum-2 exhaust system - E-Line Carbon Fiber Pipe Guard - KTM "red" power valve exhaust spring - V-Force 4 Reed Block - APT Cast 38MM Smart Carb as well as 30MM billet Smart Carb (both carbs come with the bike but I have gone back to stock carb) - Custom Neoprene Carb Jacket - Avid Carb Heat System - Custom clean air intake system - Rekluse Core EXP Clutch - Fastway/Pro Moto, Adventure Pegs, Risers and Guards - Moose Racing Grip Heaters (not currently hooked up) - Cyclops 610 Headlight (best on market) - UFO Plastics - Graphics - Giant Loop Wind Guards for hands - Seat Concepts Seat - will include as many OEM parts as I can find (OEM pipe, clutch, manual, 1 complete set of new plastics, etc.) as well as front and rear wheels, swingarm etc. Probably a few extras I am forgetting.
And here's link to Randy's "shakedown" test ride of the bike: https://www.youtube.com/watch?v=YK1m2wbGLZU
I would like to run it to a dealer to get a reading (?) on total hours, I would estimate less than 75? We got more into the 450 MX bikes a few years after this bike was built and honestly have only run it a few hours the past 2 seasons. It is a lot of fun and carries good track speed.
Current bike market says the bike alone with mods is conservatively worth $5500. $9000 buys it, over $17,000 invested in it.
I'm in southern Idaho and selling it to fund a semester or two of school. Asking a fair price including 2 SmartCarbs. NOTE: Yeti wheel kit in picture NOT included in sale; small tool box and 3.3 gallon Mt. Addiction jug are both included. Bike plastics look 4 years old....because they are. Top tunnel section of TS kit in rear isn't pretty, has had a couple of bags on it. That top piece could stand to be replaced.
Alan 208-316-0629 Please no trades, Johnny Cash Talks. Pix are not the best but should get you started.





Last edited: