We recently received our 2012 Pro 800 and upon test fitting our performance silencer as well as our full pipe kit, we realized that Polaris has slightly changed the silencer mounting angle. It is not enough to justify a re-fit of our silencer, but will require the addition of a small spacer to ensure proper silencer fit. The spacer is to be installed on the rear (chain case side)silencer mounting stud that drops through the silencer mounting bracket attached to the chassis. The update applies to all 2012 800 models.
We are currently contacting those customers who purchased silencers and pipe kits from us after May 1st 2011. We are also attempting to get with all our dealers who purchased kits from us and update their inventory as well as get there customers info in order to reach customers that purchased silencers and pipe kits from the dealer. We are trying to reach as many customers as possible that could be installing a silencer or pipe kit on a 2012, but we will not be able to reach all of you. If you do not hear from us, please contact us as we would like to get this free update out to you quickly.
Thanks,
Dustin
We are currently contacting those customers who purchased silencers and pipe kits from us after May 1st 2011. We are also attempting to get with all our dealers who purchased kits from us and update their inventory as well as get there customers info in order to reach customers that purchased silencers and pipe kits from the dealer. We are trying to reach as many customers as possible that could be installing a silencer or pipe kit on a 2012, but we will not be able to reach all of you. If you do not hear from us, please contact us as we would like to get this free update out to you quickly.
Thanks,
Dustin
Attachments
Last edited: