Anyone have any luck with the slp single on their carb king cat? I have been fighting it for more than a year now. I just cant get it to hold the r's on long pulls. On even shorter pulls in DEEP (18-30 inches) powder.
I am running
8500-10500 feet
Gutted air box
v force reeds
66.6 gram weights
stock primary spring
Rock rollers
Cutler red white (cat green spring)
51 degree helix
I loose close to 1000 rpm on long hard pulls. It starts off at 8000 but drops to 7200 and wont climb back.
I just replaced the primary, the last one had 3 cracks in the spider.
I am very close (like tomorrow) going to go back to the stock pipe, and just ride it that way till it dies.
I am running
8500-10500 feet
Gutted air box
v force reeds
66.6 gram weights
stock primary spring
Rock rollers
Cutler red white (cat green spring)
51 degree helix
I loose close to 1000 rpm on long hard pulls. It starts off at 8000 but drops to 7200 and wont climb back.
I just replaced the primary, the last one had 3 cracks in the spider.
I am very close (like tomorrow) going to go back to the stock pipe, and just ride it that way till it dies.