B
Question for you guys: I have had problems with rpms & track speed like a lot of guys. Pulling a hill in a foot of powder i can't get any more than 36mph and 7700-8000rpm. I ride an 09' rmk 800 155" which is bone stock other than an aftermarket can. I have purchased 3-delron washers, a green/pink primary spring, mtx 68 gram weights, a dual sided helix (58/40/.36 or 62/42/.46), but can't decide on my sprockets? I have heard of people using a 19/46 and having good results. You said you use a 19/42, but i've been told that might not be a big enough increase from the stock 19/41? I couldn't find a 60/40/.36 helix so i went with the dual sided. I might have all of these helix numbers a little screwy so bare with me, but i think that's what i've been told. And i've been told a 19/45 or 19/43 sprocket setup is great, but then i've had a local mechanic say that polaris doesn't recommend those cuz it'll cause problems unless you use a 20 top with a 43 or 45 bottom? So i'm frikin' confused. I'd really appreciate your advice. Once again, my sled is stock, so i'm sure your slp single & reeds make a difference with your setup. Let me know though. Thanks alot.