Replacing torq bolts on DD secondary

[Desperado]

I tore apart my DD secondary clutch and luckily removed all 9 torq bolts on the secondary clutch without snapping any. I did bend a couple though in the process. I would like to replace these torq bolts with something different, what is everyone using or are you just buying new DD torq bolts. Thanks

 

[spomey]

In Utah the best nut and bolt place I have found close to home is ACE Hardware, they have an amazing selection of hardware.

I bought hex head screws grade 8.8 I think or maybe 10.

and I used a bit of anti sieze on install.

 

[Hotwatkins]

I went with the hex head bolts also.

They were .60 ea at ace. I had 3 clutches to do so went to the bolt company and bought a box of 100 for 15 bux.

I did use locktite on them. I use a heat gun and heat it up and they come right out.