P85 clutch pulled, looking for suggestion.

[JLeosnow]

Hello,
I'm looking for the best quality clutch puller(OEM or otherwise). Can someome either inform of the OEM part number for this tool or suggest a high quality aftermarket puller?

Thanks much,
-John

 

[sled_guy]

I've bought from both HPE and SLP, not the OEM one. Both of those companies' pullers have been great. Only issue has been self induced on my part.

I've found that if you put a little grease on the threads and a little on the end where it bottoms out in the crank then you won't have trouble with bending the puller.

sled_guy

 

[volcano buster]

Avoid the 2-piece pullers.

I use light machine oil on the threads and tip as well with no problems.