I NEED HELP! 2012 Pro reed questions!

[SWARMY]

I tore the stock reeds in my 2012 Pro RMK Turbo. And bought CarbonTech reed pedals to replace them. I changed the outside reed pedals just fine. Does anyone know how to remove the pedals on the inside? I am having trouble removing the cast aluminum piece in the center and I don't want to accidentally damage anything. Any help would be much appreciated! Thanks!

 

[AdrenalineAddict]

There's two screws on the intake side of the metal divider, remove them and pull/jiggle/yank, maybe grab divider with pliers and pull straight out.

 

[CDK]

I had to use a small flathead screw driver and pry against the outside of the reed body to get it out. Takes some doing cause they're really jammed in there, but they will come out.

 

[SWARMY]

Thanks for the quick responses! I just wasn't sure how much prying was needed. Pray for snow!

 

[NapaMatt]

Good luck! they are in tight!

Id just replaced my carbon fiber ones... flaking and breaking off..

id stick with stock.. that don't flake as much