Thanks to all the help on my last post, I found the broken power valve cable and fixed that problem. Unfortunately, that wasn't all of the problem. I'm still having a bog issue in two parts, 1 - when I start the sled hot, it won't come out of an idle and go. If I wait several seconds for the tachometer and console lights to start working, it will work fine, but it idles so slow and irraticly, that it almost dies. My concern is, that the delay is getting longer all the time. Something is confused with the electrical system, and won't let it think fast enough.
The second bog issue is just a general bog that act just like a carberatur. When I'm wide open for a certain amount of time, then let off and get back on the throttle, it will bog out big time and almost die. I can only get out of this bog by milking the throttle very slightly. Needless to say, this really sucks for tree riding, when you need to turn quickly, and anticipate turns in advance. It gets me stuck a lot.
Anybody have any ideas?
The second bog issue is just a general bog that act just like a carberatur. When I'm wide open for a certain amount of time, then let off and get back on the throttle, it will bog out big time and almost die. I can only get out of this bog by milking the throttle very slightly. Needless to say, this really sucks for tree riding, when you need to turn quickly, and anticipate turns in advance. It gets me stuck a lot.
Anybody have any ideas?