ZX Summit low oil light not working

[BU1]

2000 Summit. The oil light does not come on when applying the brake. I tested the indicator light with 12v and it is good. All other lights work fine, including the tail and brake light. Any ideas on what to look for? Checked the harness plugs and looked for broken wires with no luck.

 

[XPSer]

Oil Light

Mine did the same thing a couple seasons ago. The wire that connects to the bottom of the oil tank appeared attached all the way. After looking closer, the wire was loose/corroded where the connector had been crimped on. New connector, was good to go.

 

[don keypunch]

Pull the sensor out of oil tank there's a little ring around the sensor floats up an down on sensor to make n break connection turning lite on/off often they fall off the sensor just pops into a rubber grommet in oil tank

 

[Redsledhead]

Have you checked your brake switch yet? Maybe it broken or just bad connections. Thats where I would start.