ZF Snowbike Kits ?

[Sowa]

Put a pre-order in for a 2024 kit. Excited to see what changes this MY brings.

 

[caveryis]

Does anyone know the if the window spacing, and pitch on the ZF track matches up with a Gen 1 TS Aro 120?

I have a 2018 ARO 120 and I need to pick up a new track. I can't afford a new kit, but I'm considering other track options to make the kit feel new, lol.

I'm really interested in the ZF 127" track. I think it would be great on the ARO for the conditions I usually ride.

I know that the ZF track is 12.5" wide and will need to be cut down to 11.5, but I'm pretty sure that the driver pitch is the same as the Aro 120 (2.86). If the driver/rail/window spacing is the same, I might give it a go.

Anyone here know if it's doable?

 

[zf-us]

let me get you the tech details on that. I might fire up a new thread , as this is very old thread, if you don't mind

 

[eric82930]

It's not 2.86 it won't divide evenly into 127. But 2.89 comes pretty close and if that's what it is, it should work ok because I know at one point Polaris was 2.89 and Ski-Doo was 2.86 and they were close enough to interchange without doing anything weird with the drivers.

 

[caveryis]

It's not 2.86 it won't divide evenly into 127. But 2.89 comes pretty close and if that's what it is, it should work ok because I know at one point Polaris was 2.89 and Ski-Doo was 2.86 and they were close enough to interchange without doing anything weird with the drivers.

I found this in a post on a different thread from @raleigh111 that explains that.

"They are actually 125.84 length on the 127 kit with a 2.6 track. 44 windows 2.86x44=125.84"