X 3.2

[live2beel]

Will the new x3.2 fit on a 14 pro with avid 7 tooth 3.0 drivers?

 

[goridedoo]

I'm gonna go with a no, my X3 had the equivalent to about 0 clearance.

 

[mountainhorse]

Most likely not.

You need at least 1/2" clearance on big lug tracks more is better from the tip to the tunnel at the tightest spot.

Getting the track to "fit" and having it run well are often not the same thing.




.

 

[live2beel]

Thanks. Would the new Polaris 3" fit?

 

[ullose272]

Thanks. Would the new Polaris 3" fit?

should, and would be better than a 3.0 pitch 3" track because the polaris track is 2.86 pitch which would give you a smaller driver and therefore more room. one thing that might be an issue with the axys, is you would be going to a larger driver with a 7t 3.0 pitch + an x3.2 track, might not be as much room as people thought, i dont know i havent looked at the axys.

 

[sledheader]

should, and would be better than a 3.0 pitch 3" track because the polaris track is 2.86 pitch which would give you a smaller driver and therefore more room. one thing that might be an issue with the axys, is you would be going to a larger driver with a 7t 3.0 pitch + an x3.2 track, might not be as much room as people thought, i dont know i havent looked at the axys.

The new polaris 3" track is a 3.0 pitch. The 2.6" track is a 2.86 pitch

 

[ullose272]

Oh cool didnt know that

Sent from my SM-G900V using Tapatalk

 

[gonehuntnpowder]

I have avid chaincase running 8 tooth drivers and a 3 inch track. Have all kinds if clearance. Thinking about a 3.2 for this year. Trying to decide on length.

 

[tdietzler]

Same boat, I got a 14 rmk assault Boondocker turbo and extending it and I want to run the 3.2 but I heard a drop and roll chaincase would have to happen to make it fit so might just stick with the 3.0 myself just to be safe

 

[LoudHandle]

Hell just have someone make ya a six tooth. Seems to be the trend to run stupid small drivers anyway.

 

[mountainhorse]

I've got one coming... hopefully before the snow hits... Might have to run a D&R case...Avid and IceAge both make nice units for this... and C3 makes a D&R Belt drive mount for this...

It will be interesting to see the actual fit of this and what driver combo and skid position will be needed.

LH... maybe we can put teeth on the driveshaft and ditch the drivers altogether... for Mondo Super clearance!!
Just funnin bud...

Wheres the snow??

.

 

[LoudHandle]

We got our first teaser snowfall at sea level Saturday. It is coming down in elevation every day. Hoping for a return of our normal average snow year (35 feet at sea level).