Will The Mountain Addiction gas Rack fit on my sled.

[06 RMK 900]

I would really like to get the gas rack but i'm not sure if it's going to fit between the seat and the heat exchangers? I have a 151" track.

What you all think? Does anyone have one that could measure how much room they take up?

 

[06 RMK 900]

TTT, no one has one?

 

[newmy1]

TTT, no one has one?

Perhaps you could try calling Mountain Addiction.

 

[WOODIES]

perhaps you could be patient, its only been couple hours.

 

[06 RMK 900]

Perhaps you could try calling Mountain Addiction.

I did, no answer, But I did just send them an email.

perhaps you could be patient, its only been couple hours.

I normally would but running out of time to get my sled done. Need to get it out of the shop. Wanted to order them yet today.

 

[xcrash911]

Can is 9.5" long . The back rail on mine is mounted 8.5" to the outside edge from the back of my seat, but this is on an Edge chassis so not sure on yours, bottom line I think if you have 9.5" from the front of your cooler forward you should be ok

 

[obile]

cans are 9 1/2 long. the rails are mounted 5 1/2 inches apart center to center.

hope that helps..

 

[sunbather1969]

mountain addiction

they are hitting the snow shows thats why you cant get ahold of them

 

[06 RMK 900]

Been emailing them. Doesn't look like it's going to fit. I have exactly 9.5 inches from the base of the seat to the exchanger. If it wasn't for the the seat coming out farther on top it would have fit.

Thanks everyone.

 

[newmy1]

Been emailing them. Doesn't look like it's going to fit. I have exactly 9.5 inches from the base of the seat to the exchanger. If it wasn't for the the seat coming out farther on top it would have fit.

Thanks everyone.

I had the same problem, went with http://www.trailtank.net/.

Customer rack from wwildchild her on snowest.

 

[06 RMK 900]

Ok so I came up with another idea. What if I make some spacers to raise the rails so they go over my exchanger?

My biggest concern is are the gas cans going to be to far back and the weight hurt handling of the sled? Another is does the exchanger get hot enough where I need to worry about melting the cans.

I would then find a pack to put between the exchanger and the seat.

 

[Mountainaddiction]

Gald we could help you out and that our XP mount will go over the cooler. Post some pics when you get it mounted!

Thanks!

Mountain Addiction

 

[06 RMK 900]

I have to say thanks to Leslie at Mountain Addiction for helping me get the gas rack figured out for my sled. Great customer service and fast response. Rack was shipped out Wed got it on Friday but didn't have time to put them on tell tonight.