Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

  • Don't miss out on all the fun! Register on our forums to post and have added features! Membership levels include a FREE membership tier.

wifes 600 sdi

More than likley the Idle is to low are the Belt deflection is to tight.
 
Try in this order.

1st - change plugs
2nd - check idlle. Usually this is easy to tell if it is too low before ever pushing the reverse button.
3rd - belt deflection
4th Battery. SDI will beep at you and the battery light will flash if you have battery issues. Don't go throwing money at this first. Usually something else hence this is the 4th option.

Good luck. Most times I have seen this, it has just been dirty plugs.
 
How hard is it to start? The sdi should only take two pulls, one to get all the electrical going, then one to start it up. When I had my battery issue the sled would die going into reverse and it would take a few more pulls to get it going. Also my sled never beeped at me telling me the battery was worn out.
 
Thanks guys took the battery out and charged it also cleaned the plugs and it seemed to have done the trick

925tundra page 233 in cabelas master catalog hard cover edition if youd like a picture of my wife:D
 
Thanks guys took the battery out and charged it also cleaned the plugs and it seemed to have done the trick

925tundra page 233 in cabelas master catalog hard cover edition if youd like a picture of my wife:D

"cleaned" the plugs:eek:..... DUDE, just change them. You will have problems down the road. :D:beer;
 
-k- Seen pics of wife...Sounds like you got her under control. Charged the old ladies battery and cleaned her plugs. Talking about the sled, of course. Let me know if ya need a hand....
 
Premium Features



Back
Top