Widening kit for Mountain Viper?

[TWOSTOKED]

My wife rides a 2003 Mountain Viper and says it is too tippy. Anyone know of a widening kit for the front end, and can I keep the stock shocks?

 

[snowdad4]

you can use the radious and tie rods off any short track viper. shocks are same. dont forget to align skis and camber spindles after the install.

 

[scmurs]

If you go with the stock short track radius rods and tie rods, you can also add the stock short track sway bar. That should take care of any tippy problems. Pretty sure the mountain Viper shocks will still work, but there are a lot of parts available on eBay as well. Hope this helps.

 

[Sixat38]

I thought Mtn Viper front shocks were 15 1/2" CtoC where as Viper (trail) front shocks were 17" or something like that. Might want to verify that.

 

[PowderTrax]

Front end kit

I believe Facraft has a Viper front end widening kit. You will need the sway bars installed to stop the ease of throughing the sled on its side

 

[Lt Rascal]

I have a set of radius rods and stearing rods that are 1.5" longer then the stock Mtn Max rods that I need to get rid of. How long are the stock rods? I will check mine when I get home.

 

[snakebite]

try this first its free

make sure the rear suspension is inthe upper set of mount holes
this tucks the suspension into the tunnel much less tippy
I have 2 mt.vipers one set each way my 72 year old father loves
it set this way