What's it take to mound Sly Dogs on my 09 M?

[ripsass]

My buddy blew his IQr up this weekend so his sled will be parked for a couple weeks.
Was thinking of trying his Sly Dogs out on my sled that has Powder Pro's, but don't have the original mounting hardware.

Will I be able to mount the sly dogs with the hardware we have between the two sleds?

 

[KSH]

You need a set of rubber mounts from SlyDog, There was a set in the old swap meet.

 

[Desperado]

I used my OEM Cat rubbers on my slydogs for my 09m8. Also flip the rubbers around, putting the high side on the backside of the spindle. This will help in heaving stearing and darting. When you do this you will fight a bit getting the bolt through the spindle. Put a 2x4 on the outer edge of the ski get the bolt started from the inside and push. lower the sled on the 2x4 (oh stand the board on edge too) this will push the outer edge up compressing the rubber and allowing you to push the bold through. It takes a bit of wiggling but works. I like my dogs a lot better after installing this way. Mine are the powder hounds. Good luck.

 

[Chapman]

Just a couple of months ago on hcs you were saying how terrible slydogs are and now your putting them on your sled?

 

[RockyMtn.Kris]

You should still be able to mount them up with the hardware you have just to try them out

 

[ripsass]

Just a couple of months ago on hcs you were saying how terrible slydogs are and now your putting them on your sled?

Ha, just going to use them to test a theory.

Since they are the non-steeringest, no effort required to turn skis I've ever rode they will be perfect to see weather it's my skis or my sled thats the problem.
If they steer super easy I'm going after the Powder-Pro's with a grinder and doing some re-shaping on the bottoms...

 

[bigcat_ak]

You can get a mount kit from and dealer that orders from WPS. About $26.