Whats a GREAT SOUNDING blow off valve for a 23 Turbo?

[christopher]

This is purely for FORM over function.
I am looking for a blow off valve that has a really clear clean sound to it that would be easy to pick up on video.
I need it to be unmistakable when heard.

Any suggestions?

 

[caper11]

RPM powersports blow off and boost tube works good.

 

[christopher]

RPM powersports blow off and boost tube works good.

??

1 / 3

RPM Ski-Doo / Lynx 850 Turbo Blow Off Valve ( BOV ) Kit
$99.95

RPM Ski-Doo 850 Turbo BOV Kit​

RPM is not new to the BOV industry by any means. We have created this BOV and its spring rate specifically for the factory 850 Turbo Ski-Doo based on its vacuum drawn at idle and while NOT under boost. Our kit uses a Patent Pending boost refence port that install post TB's and before the reed valves. The RPM BOV kit not only improves throttle response but takes the stress of the turbo flutter off the turbine wheel allowing for quicker spool times. This kit does require the use of the RPM Ski-Doo 850 Charge Tube for BOV installation. This installation can be done on the machine safely by an experienced mechanic. Basic mechanical abilities allow this to be installed with the throttle bodies off as well. Detailed instructions are provided

Fits all Ski-Doo & Lynx Turbo models, Gen 4 & 5

• Quicker Spool Time
• Turbo Longevity
• Lifetime Warranty
• Detailed instructions
• BOV filter with Pre-Filter
• Stainless Boost Reference Port

 

[jdog1]

Better throw a loud can on also

 

[christopher]

Better throw a loud can on also

Nope
No need for that for this specific purpose.
Though I might be adding a Titanium Can next season.

 

[TRCTY]

This is purely for FORM over function.
I am looking for a blow off valve that has a really clear clean sound to it that would be easy to pick up on video.
I need it to be unmistakable when heard.

Polaris 750 FST makes a whooosh sound any 2006-2014 will work. It will certainly hold boost pressure since they run 14 psi from factory

 

[Driver]

You can also remove resonator pipe from inside the airbox, and you will get better turbo sounds, and the cost is 0$.

 

[christopher]

You can also remove resonator pipe from inside the airbox, and you will get better turbo sounds, and the cost is 0$.

Thats an interesting idea!

 

[maniac mechanic]

This is purely for FORM over function.
I am looking for a blow off valve that has a really clear clean sound to it that would be easy to pick up on video.
I need it to be unmistakable when heard.

Any suggestions?

you wan a sound like this?

 

[jcjc1]

sounds like a squeaky wheel/almost has a whistle sound to it to it. i'll take factory over that.

 

[IDspud]

Duct tape a kazoo to the outlet.

 

[caper11]

sounds like a squeaky wheel/almost has a whistle sound to it to it. i'll take factory over that.

I feel this reply may open up a can of worms.
The Factory turbo doesn’t have a blow off actually, that sound in the above vid is normal for an actual turbo blow off. A blow off valve is easier on the turbo and prevents compressor surge (flutter) heard on the doo turbo when the throttle butterfly is closed.
There are different types of compressor surge, WOT surge (flutter)is bad, usually caused because the turbo is to big for the application.

 

[christopher]

Duct tape a kazoo to the outlet.

Oh My Gosh
Can you freaking IMAGINE people reaction.
This would actually be incredibly fun to do
To your best friends sled that is!!!!!!!!!!!

 

[IDspud]

Yeah, I can.
Did it to a 2011 cat on 12 lbs.

 

[jcjc1]

so the factory turbos deal with excess air by just leaving it in the system so to speak?

 

[caper11]

so the factory turbos deal with excess air by just leaving it in the system so to speak?

Yep.