What lubrication for silber solenoid?

[rmshaw]

My sled got some issues With Green/blue light flashing (cant feel boost)
And i had lots of moisture in the hose between solenoid and fuelcontroller and also in the solenoid. I blew it out With compressed Air and dried it With à heatgun. I read somewhere that i should lubricate the solenoid, but i dont know how and whit what kind of lubrication??

 

[Boston Racing]

I always us a tiny bit of 2 stroke oil

 

[rmshaw]

I always us a tiny bit of 2 stroke oil

Thanks man! Hope it solves My problems

But how do i lubricate it? Just ADD some oil in the hose To the solenoid? Or do i have To take it apart somehow?

 

[Boston Racing]

I pull the piston out and lube the orings directly

 

[TurboMatt]

I pull the piston out and lube the orings directly

Do you have the Part# for a replacement solenoid? Also, where can I get it? I looks like just a regular MAC valve so I'd think it would be easy to source, but the Part#'s are worn off the solenoid.

 

[lorne1176]

Do you have the Part# for a replacement solenoid? Also, where can I get it? I looks like just a regular MAC valve so I'd think it would be easy to source, but the Part#'s are worn off the solenoid.

I've got one and a Dobeck box I may consider parting with.

 

[rmshaw]

Do you have the Part# for a replacement solenoid? Also, where can I get it? I looks like just a regular MAC valve so I'd think it would be easy to source, but the Part#'s are worn off the solenoid.

+1, think i need one spare To.

 

[rmshaw]

Is there some way of preventing the moisture build up in the hoseand solenoid?

Its really crappy When the box stops sensing boost out in the field

 

[m8magicandmystery]

Is there some way of preventing the moisture build up in the hoseand solenoid?

Its really crappy When the box stops sensing boost out in the field

water displacement fluid/lubricant..the best and oldest says it all in its name

WD(water displacement)40

great for elec/connections as well

 

[Boston Racing]

Call Chris at do Dobeck performance and see if he can get you a solenoid and maybe some tips on the moisture.

 

[rmshaw]

Call Chris at do Dobeck performance and see if he can get you a solenoid and maybe some tips on the moisture.

Thanks for the tip, but since My spoken english is superbad on à very good day i think ill pass. Ill try To send him à mail instead. Do you got an adress?

 

[TurboMatt]

Call Chris at do Dobeck performance and see if he can get you a solenoid and maybe some tips on the moisture.

I did talk to Chris. He told me he didn't have any of the solenoids in stock & he gave me this skidoo part # for a solenoid for the rave valves. I was kind of hoping to just get the same one that I have. I looked up the part # he gave me and it doesn't look anything like the one I have.

If I do indeed have foreign material preventing my valve from functioning properly or bleeding off boost signal, is it possible to disassemble the unit and clean it out?

How much does it cost to update to the 2013 electronics?

 

[rmshaw]

If I do indeed have foreign material preventing my valve from functioning properly or bleeding off boost signal, is it possible to disassemble the unit and clean it out?

How much does it cost to update to the 2013 electronics?

+1 on that

 

[Boston Racing]

Yes you can disassemble them and clean them out.