The kit is a 2009 bd race gas kit on a 2010 dragon. It's got approx 700 miles on it and the turbo brgs piled up. Guy says that it takes 5 sec to get oil from the line once you start the sled. Anyone have any specs or volumes or anything for them?
On a cold day, it will probably take close to 3-4 seconds before it registers. This also depends on where you have your oil pressure gauge mounted and how long the line is. More than likely, your turbo will see oil in 2-3 seconds, if not quicker. These pumps will pull up to 3 meters.
Also, I'm not sure if BD changes out the restrictor or not on the supply side. Another thing you will have to take into account is how they setup their driver board for these pumps. You can set them up for different output levels.
That's all I know about them, sorry I couldn't help more.
Do you have pictures you can post of the bearings? What type of oil are you running?
