Water pump question

[powderboy199]

I just found a crack in my plastic waterpump propeller on ski-doo.com under the parts and everything it showes that i can buy a new propeller for 17$ can i change just the propeller? just wana make sure b4 i go order it
thanks

 

[Snow Duck]

http://www.dirtcheapsnow.com/fiche_...4&name=01-+Crankcase,+Water+Pump+And+Oil+Pump

yes you can change it but may have to take it out if it wants to be a pain and not just pop off...with a little prying

 

[powderboy199]

alright thanks but will it just pop off with the crank case together or do i have to split it?

 

[zxsummitrider01]

not sure what sled you are working on but on my 1000 rt that i just did the impeller threads on not press on. there should be two small holes in impeller, use a pair of snap ring plyers, put them in the holes and unscrew the impeller. use loctite when you put it back together. i think the 8's are the same way but im not 100% on that.

 

[Snow Duck]

not sure what sled you are working on but on my 1000 rt that i just did the impeller threads on not press on. there should be two small holes in impeller, use a pair of snap ring plyers, put them in the holes and unscrew the impeller. use loctite when you put it back together. i think the 8's are the same way but im not 100% on that.

Yes you are right on that....i have been working on too many sleds...it does thread on the 800 also....