Washington Swapmeet
- Thread starter rmk2112
- Start date
- Status
areocharger kit
i have a aero 53 series turbo kit for sale. it came off of my m-series and all of it has roughly 250 miles on it. im buying a new sled and dont have any use for it any more. kit comes with everthing you need.
make offer.
best way to contact is via email- minytallpines9@yahoo.com
thank you, joey
i have a aero 53 series turbo kit for sale. it came off of my m-series and all of it has roughly 250 miles on it. im buying a new sled and dont have any use for it any more. kit comes with everthing you need.
make offer.
best way to contact is via email- minytallpines9@yahoo.com
thank you, joey
four sleds and enclosed trailer
Posting for a friend. Sleds are in Longview, he will bring them to the swap in puyallup. The cats are low miles and immaculate! No emails please, call owner directly, ask for jim. 360-423-0048. thanks
'96 polaris 340 1250 miles
'92 yamaha 340 2670 miles
'93 wildcat 700 1480 miles
'97 Ext 580 1134 miles
'99 24' pace trailer
asking $12,000 for complete package
Posting for a friend. Sleds are in Longview, he will bring them to the swap in puyallup. The cats are low miles and immaculate! No emails please, call owner directly, ask for jim. 360-423-0048. thanks
'96 polaris 340 1250 miles
'92 yamaha 340 2670 miles
'93 wildcat 700 1480 miles
'97 Ext 580 1134 miles
'99 24' pace trailer
asking $12,000 for complete package
Last edited:
1999 Polaris RMK parts
I've got a couple items laying here at my house that might be useful to someone. My friend parted his sled and these were leftovers, been sitting here for almost a year.
(1) right side trailing arm
(1) fuel tank - no cap.
Pick them up in Ellensburg. PM me if you want them, otherwise they'll go to the dump.
I've got a couple items laying here at my house that might be useful to someone. My friend parted his sled and these were leftovers, been sitting here for almost a year.
(1) right side trailing arm
(1) fuel tank - no cap.
Pick them up in Ellensburg. PM me if you want them, otherwise they'll go to the dump.
IQ RMK parts
ProRMK hood, NEW, red, $150
2008 Dragon hood, mint, fits all 05-10 IQ chassis, $250
08 600/700/800 stator, used, $95
Power Commander III for 800 cfi-4, $180
07 600 RMK complete exhaust, 300 miles, like new, $75
L/H control assembly (on handlebars), used, low beam only, $30
Torsion springs (.359/77*), stock springs, used, $60
ProRMK hood, NEW, red, $150
2008 Dragon hood, mint, fits all 05-10 IQ chassis, $250
08 600/700/800 stator, used, $95
Power Commander III for 800 cfi-4, $180
07 600 RMK complete exhaust, 300 miles, like new, $75
L/H control assembly (on handlebars), used, low beam only, $30
Torsion springs (.359/77*), stock springs, used, $60
Last edited:
WTB: Super clamp II
I am looking for a set of superclamps. Front and rear. I would rather put the money into a snowmobilers hand than buy from a big company so wanted to see if anyone had a set for sale before I buy at the Snow show in a few weeks. Let me know if you have fronts, rears or both. Im located just north of Seattle.
I am looking for a set of superclamps. Front and rear. I would rather put the money into a snowmobilers hand than buy from a big company so wanted to see if anyone had a set for sale before I buy at the Snow show in a few weeks. Let me know if you have fronts, rears or both. Im located just north of Seattle.
C
chief 8101
Well-known member
2008 Polaris Outlaw 525 Limited Edition
525 KTM engine, electric start, reverse, limited edition non skid seat cover, plastics and graphics, fox reservoir shocks front and rear, approximately 10 hours of use and tires still have the nubs on them.
Asking $4500 OBO
Is located in the Cle Elum area.
Monty
206-617-4521
525 KTM engine, electric start, reverse, limited edition non skid seat cover, plastics and graphics, fox reservoir shocks front and rear, approximately 10 hours of use and tires still have the nubs on them.
Asking $4500 OBO
Is located in the Cle Elum area.
Monty
206-617-4521
Last edited by a moderator:
C
chief 8101
Well-known member
2010 Polaris RZR 4
2010 Polaris RZR 4 Robby Gordon Edition loaded with accessories and in excellent condition.
· 254 miles / 30.5 hours
· Plastic Roof
· ½ Windshield
· Locking Glove Box
· Under Dash Block Off Kit
· Rear Storage Box
· Rear Storage Rail
· Quick Connect Flag
· Horn
· Nerf Bars
· Rearview Mirrors
· Front Bumper
· Rear Bumper
· 2" Lift Kit
· Aluminum A-Arm Guards Front and Rear
· Winch
· Sand Tires and Rims
· SSV Overhead Stereo with 4 Speakers
Asking $17,000
Monty 206-617-4521
2010 Polaris RZR 4 Robby Gordon Edition loaded with accessories and in excellent condition.
· 254 miles / 30.5 hours
· Plastic Roof
· ½ Windshield
· Locking Glove Box
· Under Dash Block Off Kit
· Rear Storage Box
· Rear Storage Rail
· Quick Connect Flag
· Horn
· Nerf Bars
· Rearview Mirrors
· Front Bumper
· Rear Bumper
· 2" Lift Kit
· Aluminum A-Arm Guards Front and Rear
· Winch
· Sand Tires and Rims
· SSV Overhead Stereo with 4 Speakers
Asking $17,000
Monty 206-617-4521
Last edited by a moderator:
I have several items for sale listed below. If you are interested in anything, send me a PM and I can bring it with me to the Puyallup Snow show on Sat. or to Clems Open House on the following Friday. Otherwise, it will all stay at home.
Polaris Wedge Chassis lightweight aluminum trailing arm set (I think these are Tyson, but not sure) with radius rods, heim joints and spindles (stock spindles). One of the steering arms is broke and one of the radius rods is bent but could easily be straightened. I would guess that a stock steering arm would work. Some of the powder coating is chipped off as well. $150 obo.
Polaris Tachometer - Edge Chassis, PERC compatible, New in Box $50
M Series idler wheels 8" as shown $30
Pivoting handle bar riser 2" Green anodized $40
Polaris Gen II tunnel that had Tyson Drop and Roll Excellent condition. Make Offer
Polaris Stator 98 700 Good condition $30
Polaris Wedge Chassis lightweight aluminum trailing arm set (I think these are Tyson, but not sure) with radius rods, heim joints and spindles (stock spindles). One of the steering arms is broke and one of the radius rods is bent but could easily be straightened. I would guess that a stock steering arm would work. Some of the powder coating is chipped off as well. $150 obo.
Polaris Tachometer - Edge Chassis, PERC compatible, New in Box $50
M Series idler wheels 8" as shown $30
Pivoting handle bar riser 2" Green anodized $40
Polaris Gen II tunnel that had Tyson Drop and Roll Excellent condition. Make Offer
Polaris Stator 98 700 Good condition $30
Ski-Doo Track and Chevy Performance Parts
Track off a 2009 Summit X 800 XP, $350obo, no torn or missing lugs, great shape. ~1500 miles on track. Swapped out for an aftermarket track for this season. 154x16x2.25. Better shape than most others out there.
Also have some GM upgrades:
Hypertech Power Programmer III for 2001 Chevy/GMC/GM 4.8L/5.3L/6.0L $150
Granatelli MAF 1999-2006 4.3L-8.1L $100
Airaid Intake 2001-2002 Cherolet 2500HD with tall hood $150
Husky Mud Flaps - New in Box, Fits 99-2006 GM trucks - $40 for the set of 4
Pics here: http://seattle.craigslist.org/skc/pts/2688047094.html
Track off a 2009 Summit X 800 XP, $350obo, no torn or missing lugs, great shape. ~1500 miles on track. Swapped out for an aftermarket track for this season. 154x16x2.25. Better shape than most others out there.
Also have some GM upgrades:
Hypertech Power Programmer III for 2001 Chevy/GMC/GM 4.8L/5.3L/6.0L $150
Granatelli MAF 1999-2006 4.3L-8.1L $100
Airaid Intake 2001-2002 Cherolet 2500HD with tall hood $150
Husky Mud Flaps - New in Box, Fits 99-2006 GM trucks - $40 for the set of 4
Pics here: http://seattle.craigslist.org/skc/pts/2688047094.html
1998/99 KTM EXC/SX 380 Excellent Condition
I bought this bike about 3 years ago, completely disassembled it. I went through the motor 100%, found some cracks in the cases, so I replaced them with 1999 cases with the hydraulic clutch. Every bearing and seal was replaced along with new piston and rings. The frame was powder coated. New chain, sprockets, brakes, tires, plastic. It has a clear 3.2 gal tank as well as a couple of other spare black tanks. I have the old plastics and misc parts left over as well. I have 3 pipes for it (one Pro Circuit) and 2 silencers (one FMF spark arrester). I have set this bike up so that I can run the large tank, heavy flywheel, bark busters and gear it down for trail use and then swap tanks, put on the SX flywheel, change front sprocket and let it rip on the MX track. Custom graphics with a Christian theme. Way too much to list, but this bike has been gone through 99%. One thing that is wrong with it is I installed Synergy seals in the forks and screwed up on the install, so one leaks. I have a new set of stocker type seals that need to be installed, but haven't found the time. I have well over $3000 invested in it with countless hours of labor. I rode it about 6 times the first year, once the year after and once this year. I'd love to keep it, but I could sure use the money right now. A true sacrifice sale at $2200 firm. I will get some current pics taken of it today and get them posted up tonight. You won't be disappointed with this bike, and the torque is unreal. It will easily compete with the new 4-strokes on the track, yet is still a blast to fly through the tight woods. 2-strokes Rule (lol). Shoot me a PM for my #. Located in eastern Washington
I bought this bike about 3 years ago, completely disassembled it. I went through the motor 100%, found some cracks in the cases, so I replaced them with 1999 cases with the hydraulic clutch. Every bearing and seal was replaced along with new piston and rings. The frame was powder coated. New chain, sprockets, brakes, tires, plastic. It has a clear 3.2 gal tank as well as a couple of other spare black tanks. I have the old plastics and misc parts left over as well. I have 3 pipes for it (one Pro Circuit) and 2 silencers (one FMF spark arrester). I have set this bike up so that I can run the large tank, heavy flywheel, bark busters and gear it down for trail use and then swap tanks, put on the SX flywheel, change front sprocket and let it rip on the MX track. Custom graphics with a Christian theme. Way too much to list, but this bike has been gone through 99%. One thing that is wrong with it is I installed Synergy seals in the forks and screwed up on the install, so one leaks. I have a new set of stocker type seals that need to be installed, but haven't found the time. I have well over $3000 invested in it with countless hours of labor. I rode it about 6 times the first year, once the year after and once this year. I'd love to keep it, but I could sure use the money right now. A true sacrifice sale at $2200 firm. I will get some current pics taken of it today and get them posted up tonight. You won't be disappointed with this bike, and the torque is unreal. It will easily compete with the new 4-strokes on the track, yet is still a blast to fly through the tight woods. 2-strokes Rule (lol). Shoot me a PM for my #. Located in eastern Washington
Sky-hi sled deck
I have a sky-hi Aluminum sled deck for sale it is blacked out, with a nine foot ramp and ski runners, it is made for a long box. Im located in Mount Vernon Wa, 1650.00 Obo
*SOLD*
I have a sky-hi Aluminum sled deck for sale it is blacked out, with a nine foot ramp and ski runners, it is made for a long box. Im located in Mount Vernon Wa, 1650.00 Obo
*SOLD*
Last edited:
2012 Klim TekVest - Lg
Used once.
Getting a Ballistic jersey instead.
$150 + shipping
Or local delivery
email or PM
jeff@snohomishplumbing.com
Used once.
Getting a Ballistic jersey instead.
$150 + shipping
Or local delivery
email or PM
jeff@snohomishplumbing.com
Last edited:
2001 SKIDOO Highmark X
01 800 156" track big wheel kit,thing can, new topend, weisco twin ring piston kit, new jugs, oil and fuel lines, new chaincase bearings and seals, 2880 on odometer, 8-10in bar risers. basically i had this rebuilt and ended up buying a new M1000 before i got it back. so i need it outta my garage im tierd of looking at it, black..
509-679-8546 for questions or pics, im in wenatchee
01 800 156" track big wheel kit,thing can, new topend, weisco twin ring piston kit, new jugs, oil and fuel lines, new chaincase bearings and seals, 2880 on odometer, 8-10in bar risers. basically i had this rebuilt and ended up buying a new M1000 before i got it back. so i need it outta my garage im tierd of looking at it, black..
509-679-8546 for questions or pics, im in wenatchee
2010 XP take off skis
Black with black loops. Carbides. less than 20 miles, they still have the stickers on the bottom. $150.00 Let me know if you need pictures or have questions. 360 661 4691
SOLD
Black with black loops. Carbides. less than 20 miles, they still have the stickers on the bottom. $150.00 Let me know if you need pictures or have questions. 360 661 4691
SOLD
Last edited:
RT1000 SkiDoo Belt - Seat with trunk (fits REV also)
RT1000 new, unused SkiDoo belt - 180 + tax at dealer, 150 will get you the belt and the seat w/trunk. The seat is perfect (dusty in picture), belt is new.
Give me a call if interested, Cle Elum.
425-501-8095
Brad
RT1000 new, unused SkiDoo belt - 180 + tax at dealer, 150 will get you the belt and the seat w/trunk. The seat is perfect (dusty in picture), belt is new.
Give me a call if interested, Cle Elum.
425-501-8095
Brad
looking for a m6 153"
Want a m6 2007 -2010 1600-2500miles
Want a m6 2007 -2010 1600-2500miles
- Status
