Video Turbo nytro

[powderlites]

12 psi boost FX Nytro
Thanks to Scott from Snowmotion

http://video.google.ca/videoplay?docid=2740145585944885822&q=powderlights+nytro+turbo+video&total=1&start=0&num=10&so=0&type=search&plindex=0

Now we have new EFI with timing control and makes 287.4 HP at 14 psi boost.

www.powderlites.com/turbokits.html

 

[DARKO]

Looks snappy, sounds good too !

Next time the recycling truck comes by for plastic bottles, hand him that skid. Nasty.

 

[moto.racerx]

FX Nytro Kit Stage 2 = $ 6,795 Can

 

[BigFish BC]

clicky for you
http://video.google.ca/videoplay?do...l=1&start=0&num=10&so=0&type=search&plindex=0

 

[Duke]

12 psi boost FX Nytro
Thanks to Scott from Snowmotion

http://video.google.ca/videoplay?docid=2740145585944885822&q=powderlights+nytro+turbo+video&total=1&start=0&num=10&so=0&type=search&plindex=0

Now we have new EFI with timing control and makes 287.4 HP at 14 psi boost.

www.powderlites.com/turbokits.html

What are you using for a fuel box Dave ??

 

[Reeb]

Was that Hooker on that during the first part of the vid?

 

[sledskiing]

Looks really sweet. What tunnel is that on the other Nytro?

 

[mattymac]

Looks like it boogies pretty good!

 

[LOYTOY]

any engine work? head shim?

 

[powderlites]

PowderLites Nytro turbo

Yes Reeb that was Tom Hooker first ride! He just jumps on and goes? He rides it like a toy.
Head spacer at 11-12 psi boost.
A D Boivin ZX2 Plastic suspension and works good for 153 X 15
Yeah guys teasing me about milk crate suspension!
about 20 lbs lighter
We now have sled running new EFI and more boost and at 14 psi it made on Dyno 287.4 HP near sea level.
I will upload more info on our website soon
http://www.powderlites.com

 

[Ken Climb]

Looks pretty shnappy man.....so much for rear mount lag huh! lol

 

[jigger]

What are you running for set-up on the ZX-2? I have it on my RX-1 Mnt and really like it. I'm Running 2-4 holes/ single shock at 5 preset. It looks like the turbo and the skid really rock.

 

[IRONMAN]

Looks pretty shnappy man.....so much for rear mount lag huh! lol

ha thats funny, havent tried a front mount nitro I guess hey? Nice vid dave looks like it working good, I'd like to see that skid with a long track on it, be a little slower in the drag race but climb alot better in pow and mite keep the skis down real good.

 

[BigFish BC]

What are you using for a fuel box Dave ??

i hope dave dosnt mind but its posted on ty he is using the rapid bike 3 efi system it like a dynaport system but from what i have read allot better.

 

[tomx]

Enjoyable vid. Turbo sounds nice and performance looked great. Dreaming of a turbo myself someday soon.

 

[snow_knight]

humm.. now I have ideas running in my head


Looks like a nice running sled.... still dont know about the suspension though

 

[NITROSKIDUDE]

Thats freakin sweet video I need boost. I have my eye on your thread there Snow knight. I must sell my rev quick.

 

[switchback]

Nice

 

[Duke]

Powderlites Nytro

Dave's kit is looking pretty good, saw it in the shop a while back, good choice on the Rapid Bike boxes, mine's been great since it was mapped on the Dyno.

 

[powderlites]

Well to sum up the changes since this video was done.
1- Changed out EFI system to Rapid biike 3. Big improvmentand more HP and really help to advance timing for throttle response.
2-Rear suspension has changed out shock and spring and starting to ride better. Was way to stiff
3-Went to 156 X 16" track. Wow what a difference in deep powder.But slow on top end.
4-Looking at it on the back of truck and notice subframe bent!!
5-Had the MOB ride it in Revy and he told me Balljoints are gone and very stiff steering.
6-Went to newer Simmons Ski mounts from Val. Took all the nervous steering away.
7-Tired 4 different Fuel regulators and also bigger injectors.
8-Wishing I had 09 XTX shock damping in my sled.
The most fun sled I have had in years and I did more riding this year then the pasted 3 years all put together.
Thanks to Serge Miller for always having someone to compare to and he does pretty good tunning for a trucker!! with a Vector.
http://www.powderlites.com/access.html