VES With 860 Big Bore Kit

[800 Escape]

NON-VES With 860 Big Bore Kit

I have an older (0-05) 800 with the Struther's 860 big bore kit that was disassembled due to a noisy crank bearing, but was still running strong. It is complete with a PSI big pulley, & belt water pump kit on it too. The crank also has the big bearing kit on it as well. I will let it go for $1200 complete with electronics, bored carbs, v force 3 reeds,& all. Also it has a large 1 piece motor plate for edge chassis & a slp single pipe & can that will be included aswell.

Ok motor plate & pipe are gone so I will let it go for $900!!!

 

[itsallgood]

sell the motor plate seperate? what brand?
achad5150@aol.com

 

[800 Escape]

If the motor sells without it I will let you know, for the brand name I'm not sure I think psi

 

[800 Escape]

Or $1000 without the pipe & motor plate, need to clean my bench off.

 

[800 Escape]

To The Top!!!

 

[800 Escape]

To The Top!!!

 

[go high fast]

Any interest in selling top end only.

 

[800 Escape]

Sure, what all would you want?

 

[800 Escape]

To The Top!!!

 

[HAZZER]

still have

do you still have this engine and whatsleft need jugs and pistons but if u need it all gone then we can talk on that too

 

[speedysprocket]

I'd be interested in the top end- pistons, cylinders, power valve assemblies and head. Cylinders in good condition? What's the piston size?
Thanks,
Alex

 

[HAZZER]

PM

PM'D YA OR CALL ME

 

[buster 98]

motor

I have a psi dial a dome head that is 3mm wider than a stock 800 bore. will it fit this motor ? i want to sell it.

 

[800 Escape]

To The Top!!!

 

[800 Escape]

To The Top!!!

 

[800 Escape]

To The Top!!!

 

[800 Escape]

PRICE DROP AGAIN $900!!!

 

[800 Escape]

To The Top!!!

 

[HORSEPOWERJUNKIE]

Please give me a call about motor (509) 994-6557