Venting for Turbo Setup?

[Zone28M7]

So I just installed a Silber kit on my 12 M8. What venting would you suggest? I've got PDP venting on the side panels but nothing else. Wasn't sure if people noticed clutches running hot etc.


Sent from my iPad using Tapatalk HD

 

[Hardass]

I run with my hood off every chance I get or run my mini hood the more air flow with out snow on your clutch the better.

 

[av8er]

I drilled 1/2" holes in my Clutch cover

I have BDX vent kit on my turbo, including Shock tower vents on both sides, and the normal side vents. i'm also running a Twisted Cold air intake. I've never had any issues with heat except last year running a 3" down a icy trail in the spring, the lugs were too tall and ice scratchers weren't effective .

 

[Snowmow]

Vent as much as you can. Heat kills

 

[007]

I run the bra from the 1100 turbo that goes on the nose to work very well with 1" holes drilled in the nose cone and up the front of the hood.

Oh ya and its cheap. one more tip I used some 3m velcro to hold down the sides.

KJP

 

[Zone28M7]

I run the bra from the 1100 turbo that goes on the nose to work very well with 1" holes drilled in the nose cone and up the front of the hood.

Oh ya and its cheap. one more tip I used some 3m velcro to hold down the sides.

KJP

I like this idea here. Might have to try it out.

 

[Zone28M7]

Vent as much as you can. Heat kills

Yeah I had my first ride on the turbo last weekend and the clutches were steaming hot! Everything ran fine but was hot as hates!