Turbo xp questions before we start.

[badass1000]

she blew at 80psi? thats alot of boost.

I had a 06 gsxr 1000 runing 12lbs of boost with a supercharger and a 120hp shot of nitrous. I was on the nitrous one time drag raceing and it spun hitting the rev limiter so I choped the gas and when I got on it again it made a loud pop. people heard it clear back in the pits. pulled the tank off and

Hamered it back down and welded it back up.

 

[lookup]

I really do not know diddly about turbos,but to have a better throttle response with rave valves ? Mine seems to have really good response but i am running a 154" track and geared low, do not know if that plays in.I may just play with it all this spring and find out what works the best since it was 54 degrees this morning,this season is really weird for weather I may have time to tune instead of slushy rides

 

[mtn-doo]

Hey Nick, I want 80 psi boost on mine!!!!! ha!!!!

 

[nuttyn01]

wow

Yeah...I felt a little nervous when i looked down and saw 14 psi...80 psi...thats funny.

 

[Wheel House Motorsports]

I think we need to get a bigger boost gauge.. the one on the sled only goes to 15#... thats not gonna be very helpful!!!!

got a bunch of parts put on the t-xp.. rejetted properly.. thinkin its goin to lay down some boost this afternoon.. 80# on pumpgas!!!!

 

[nuttyn01]

gearing

I am running a 21 tooth top with a 154...I have ridiculous track speed but i dont suppose it is helping my bottom end. You running a garret or aero?

I really do not know diddly about turbos,but to have a better throttle response with rave valves ? Mine seems to have really good response but i am running a 154" track and geared low, do not know if that plays in.I may just play with it all this spring and find out what works the best since it was 54 degrees this morning,this season is really weird for weather I may have time to tune instead of slushy rides

 

[nuttyn01]

miles!!!

Hurry up and get some miles on that hot rod with mark's valves. He wants longevity reports before he will start production.

Hey Nick, I want 80 psi boost on mine!!!!! ha!!!!

 

[Wheel House Motorsports]

well.. we got the 310 mains in it and cranked the power jets open 3 turns just to be safe. the thing RIPS out of the hole right now, comes on like a stocker then just gets it goin up high... these things are insane easy to get running way crisp.. needs a few little things to get it totally dialed, but for the first proper jetting try, it runs awsome.

only was able to rip it around a vacant lot in town with like 2" of snow, but it ran really clean, a hair rich on top, but we were keepin it safe as it was hard to look at the gauges.

 

[lookup]

i finally settled on 20 49 gearing seems to be instant on the throttle

turbo xp aero 53 6lbs
20 49 gearing
2mm over rollers ? raised my egagement to 4800rpm didn't like
415 ramps
purple purple spring engages at 3800
shockwave helix think a multiangle helix from rooster built would be the ticket
track speed at least 45

stock x 800 xp
slp can
20 49 gearing
rooster built clutch kit WAHOO !
always 37 mph track speed

wish rooster built would do a clutch kit for a turbo

keep in mind this is just what i like and weigh in at 255lbs i think a lighter guy could gear higher and be happy and i like a 19 49 for spring slush

just my $.02

 

[mtn-doo]

Hurry up and get some miles on that hot rod with mark's valves. He wants longevity reports before he will start production.

I am puting a ton of miles on them. I am going again today. They work PERFECTLY !!!!