Turbo line question?

[snowbank]

Ayone know what size the oil line restrictor fitting should be? Mine says XG8 on it. This would be the fitting that regulates how much oil gets to the turbo.
I'm thinking mine is to small, just trying to make sure my turbo is getting enough oil.

 

[Apex06]

Ayone know what size the oil line restrictor fitting should be? Mine says XG8 on it. This would be the fitting that regulates how much oil gets to the turbo.
I'm thinking mine is to small, just trying to make sure my turbo is getting enough oil.

what about drilling out the fitting??

 

[snowbank]

that is exactly what I was wondering seems like I should be able to drill a 1/32 hole in it and call it good just wondering what others have done. I don't want too much oil that causes problems also.

 

[M5-]

If it's a Garrett GT turbo they rocommend a 0.040" restrictor which is a # 60 drill bit. 1/32 is a little too small.

M5

 

[snowbank]

got the specs on this it's a #77 drill bit which is .018 it flows oil real nice now