Turbo Builds!

[edavis0202]

I wanted to start a thread on here and see some sweet turbo builds. Not a pissing match of which is better, just post your ride and tell us what you got. I just got a teaser of mine today from Vohk and cant wait to take her out on the snow.

2015 Assault 155"

Boondocker 2860 Tial GTX Water to Air Intercooler on 10lbs straight avgas, SLP intake
Fox RC2'S Front and Rears
36" Titanium A-arms
Tunnel re-enforcements
Boards
Nextlevel front and rear bumpers
153" 2.6" Powderclaw track
Skinz headlight delete
RSI Bars
Skinz new low seat (not shown)
ArcticFX Wrap (not shown)

Cant wait to go for a rip!

 

[Kenny B]

You know I was thinking about a thread like this as well. Here is a run down on the weapon.

2012 Assault

Indy Specialty Long Rod
Reworked Terra Alps Heads
Silber Billet Boots with injectors
Silber Intercooler Modded to Water to Air by Boost-IT
Boyseen Turbo Reed Pedals
Vipec ECU
Boost-It fuel pressure reg. 1:1
Reworked Stock Pipe (Larger Stinger) / Ceramic Coated, with Thermo wrap.
Boondocker 2860/ Soon to have a oiless KPA Centre with Billet wheel.
FTX 6 mount Motorplate
Re-Enforced Bulkhead
Van Amburg Long Bumper (not happy, took two try's and still does not fit perfect. I have a spare which is to long though.. maybe I'll go 156/3" one day)
Van Amburg Boards.... One fit, one had to be cut and welded.... Gave up on trying to get customer service. Buy this stuff elsewhere.
Front IQR Shocks, revalved and springed.
Timbersled front suspension
Stock Rear shocks, Revalved and the front got a spring.
Gearing => 22/39 (Subject to change when snow comes.)
Had an areomotive fuel pmp, taxed electical system, replaced with stock.

I run between 9-12#'s at sealevel depending on the day and what I'm doing.

 

[brmk]

here is the start of my build.
2015 163
mods are x3 track and 7 tooth drivers
boost it turbo kit
2860 turbo, electronic boost controller, torque stop, water to air cooled.
heading out to test it out on the weekend! cant wait

 

[jiujitsu]

2014 Pro RMK 155 600 miles
New pistons
Reeds
2015 Boondocker Turbo 2860 non-tial
Water to air intercooler
Alternative impact 36" front end chrome molly
Fox Float EVO R's in the front
Fox Float EVO RC2's in the rear
TKI belt drive gear down
TKI tensioner
SKINZ ARC coupler (cable type)
RSI bars
SLP cold air intake
RSI headlight delete
SKINZ AIRLOC running boards
Arctic FX wrap
Burandt windshield
RSI seat cover
The pictures are from part way through the build so no everything is shown yet.
Few other goodies in the works like venting and bumpers.
Not as good as some I am sure, but a pretty good build for me and should be a lot of fun.
https://www.youtube.com/watch?v=HsbwF51WdnQ Link to a partial build video

 

[Silber]

Few turbo builds

 

[sledhead9825]

Here is my Stormtrooper
Started as 2013 Pro 162
Going into season two with these upgrades other than the 174,new this year.
Last year it had 162x3 with a Kmod on Fox Floats.

Boost-it Ho kit with a GTX 2863 W2A intercooler
Boost-it Belly pan secondary cooler

Zbros 36 inch A arms
Exit shocks
TKI belt drive Gear ratio 2.36 with the 7 tooth drivers
Racers edge skid with Elkas
Ice age black anodized 174" rails
174 X 3 track
Boost-it tunnel Ext with Cr Racing reinforcement
Cr Racing wide running boards
$ 28.00 upgrade
Curve Skis with a Carls cut
Clutch Fan
Reversible scratchers
Going to try the Doo reversible scratchers, bolted to the skis
RSI bars and risers
Rigid LED mounted behind Skinz headlight delete
WRP seat
And a couple of vents
There is probably some things I forgot
Parts coming Tial housing and external waste gate, not sure if I need it but what the He$$
Big Thanks To NM,TJ and the rest of the crew at Boost-it
The Sled Performs flawlessly

 

[AKFULLTHROTTLE]

Second season on her, just did some upgrades. Waiting for the new chassis to come out.

2013 Pro RMK LE

2013 Silber Turbo
ECU flash with 2 injectors
Billet Wastegate & Walbro Oil Pump
163" x 15" x 3" Camoplast Challenger Extreme
Curve IND Skis
Ice Age Billet Anti Stab Kit
Ice Age 8” Rear Wheels
Ice Age Bomber Rails
Mountain Fit Hoods Headlight Delete
SLP High Flow Air Intake
MadFab Gauge Lifter
FLY Racing CR High Bend with Graphics
FLY Racing 4" Riser
RSI Pivot Adapter
Arctic FX Graphics Wrap
Stomp Grip Tunnel Sides
Skinz NXTLVL Front Bumper
Skinz Rear Bumper
Skinz Airframe Running Boards W/ Footloks
Skidplate/White
7 Tooth Avid Drivers
RK Tech Pistons
OFT Racing Teather
OFT Billet Steering Blocks
LED Light
Exit X0-SR Center Skid Shock
Exit X1-SR Rear Skid Shock
Custom Powder Coating
2 Cool Vents
RSI USB Charging Cables
T3 Customs Footwell Vents
VE Beltdrive Guard
MA Track Rack 3.3G Tank




Turbo pic is before a few upgrades

 

[purepolaris600]

my build

Building my 12 pro rmk running silber turbo setup,with custom water2air innercooler, new kpa oilless 2860 turbo, turbo ported cylenders, power addiction turbo head, skinz ARC, zbroz a arms new camo extreme 2.5 track, avid 7 tooth drivers, ice age anti stab, riding on all new exit shocks getting built now, converted chaincase to belt drive, team tied secondary, and alot of powdercoat.