Track break in

[DallanC]

I replaced my 156 track on a '02 edge this summer and its ready to go for the winter. I adjusted it as per the polaris manual but I know its going to have some stretch as it breaks in. After how many miles should I check / re-adjust the track? Anything else to be aware of during this time?


-DallanC

 

[Jkinzer]

just ride it, if it starts to ratchet tighten it up a little, if it doesnt your good to go

 

[Scott]

If you have a track stretcher, you can put it on that and then spin it for a couple hours.....you'll have her all broke in.

 

[priest lake rmk]

Or if you have a track stand, lift the back of the sled off the ground and hold it WFO for ten minutes.

 

[happyfast79]

Or if you have a track stand, lift the back of the sled off the ground and hold it WFO for ten minutes.

yea i probally wouldnt recomend that lol, just ride it and if it starts to ratched tighten it.

 

[sixpointbull]

Or if you have a track stand, lift the back of the sled off the ground and hold it WFO for ten minutes.

....and, if memory serves me correctly, you can run it on the track stand without the primary...right?

j/k Tets - thread brought back an old memory!

 

[priest lake rmk]

Jesus, some people just don't get it.

 

[rotax]

man, think of the rotating weight you can save w/o running the primary!

...err...wait a minute... i mean yeah...direct drive straight off the pto! /win

hehe