T
TurboMatt
Well-known member
I am getting rid of the Timbersled Barkbuster front end parts. I it a rock my last timeout and took out the right side lower a-arm and spindle. I want to sell what I have left as a partial kit or for spare parts. This is thew 38" kit. I have 3 good upper a-arms, 1 good spindle, 1 good lower a-arm, 1 lower arm that was rewelded last year after I busted it loading my sled on the trailer(I put 200miles on this rewelded a-arm, its held up perfectly, I eventually replaced it with a new replacement and kept this one as a spare. the bushing is also kinda screwed up on this one) & all spacers, bolts, tie rods, and tie rod ends(except I'm missing 1 spindle bolt) & install instructions.
All parts can be used on either side of the sled(the lower a-arms need the sway bar tabs cut off if you are gonna use them on the side opposite that they were intended.)
Basically this is almost a complete kit. If you are cool with running a rewelded lower a-arm all the kit is missing is 1 spindle.
Prices:
will sell everything pictured for $400
will part out...
$65 per upper a-arm
$80 for the good lower
$35 for the rewelded lower
$75 for the spindle
$25 for all the mounting bolts spacers,etc
$30 for both the tie rods
prices do not include shipping
I prefer Paypal.
All parts can be used on either side of the sled(the lower a-arms need the sway bar tabs cut off if you are gonna use them on the side opposite that they were intended.)
Basically this is almost a complete kit. If you are cool with running a rewelded lower a-arm all the kit is missing is 1 spindle.
Prices:
will sell everything pictured for $400
will part out...
$65 per upper a-arm
$80 for the good lower
$35 for the rewelded lower
$75 for the spindle
$25 for all the mounting bolts spacers,etc
$30 for both the tie rods
prices do not include shipping
I prefer Paypal.
Last edited:
