timber sled setup

[sum-it]

how are people setting up the rear skid on the dragon with 7 to 10 pounds of boost with timber sled rear skid.

 

[SLDHVN]

dont know if this helps, but here are the recommendations

http://timbersled.com/docs/09-10 163.pdf

 

[Jkinzer]

last year i ran both the shocks in the forward (stiffer holes) front shock around 60psi and rear around 130, worked great for climbing kept the ski's glued to the ground all the time and ate up moguls when hauling @$$ uphill. this year i did the FTX drop and roll, granite i only have two rides on this set up so far and nothing in a super steep climb but i have moved the shocks back to the rear holes on the rails, running the front shock at 60-70psi and the rear shock at 125-135 psi and love it! pulled a couple of climbs and it kept the front end down nice, soaked up the bumps and was very nimble in the trees

 

[charlie99]

D&R

JKINZER how did you adjust your mounting points for the rear of the timbersled setup with the d&r did you move your rear mount forward, i also have the same setup as you.