throttle override

[1racer]

Is there a way to bypass the throttle override on these sled? I know it is there for a safety, but I have had issues with them in the past and I have a tether, key and factory kill on the bars. Any help would be appreciated would like to be able to use a billet throttle block.

Thanks in advance

 

[stormxz2]

What is a throttle override?
English is my second language so...

 

[1racer]

It is the safety switch behind the throttle cable on the handle bars. It is part of the throttle block and will not let the engine rev up if it is not depressed first. I want to eliminate it but you can't just unplug it or the ecm sends it into limp mode and won't run very well.

 

[crf118r]

It is the safety switch behind the throttle cable on the handle bars. It is part of the throttle block and will not let the engine rev up if it is not depressed first. I want to eliminate it but you can't just unplug it or the ecm sends it into limp mode and won't run very well.

I untaped mine and pulled the moving pin out and taped it back up and stuffed it under the hood. There isn't really any other way that I can find without some aftermarket replacement circuit that isn't made yet.

 

[1racer]

That's what I was thinking of doing, figured I would ask if anyone had any way besides going that route.

 

[crf118r]

That's what I was thinking of doing, figured I would ask if anyone had any way besides going that route.

There isn't one.