Thinking about doing a Tether Kill leaning towards a PRO ARMOUR

[Sledaction 198]

What have you guys done for tether on your dragons? Would love to see pictures and how you guys did it.

 

[snowman429]

I went with one from slp. I mounted it in the same spot as the key and zip tied the key switch to the frame under the console.

 

[Sledaction 198]

I went with one from slp. I mounted it in the same spot as the key and zip tied the key switch to the frame under the console.

Is it this one? and did it just plug right in?

 

[Audette13]

i used that slp one and hated it, the rubber was not strong enough to hold down the plunger.

i used a pro design and love it

http://www.motorcycle-superstore.com/26138/i/pro-design-tether-switch

 

[Snowbird11]

lean away from the pro armor unless you are good at fabricating. they are cheaply made and the plastic clip breaks easily. the pro design audette mentioned seems to have the least negative feedback out of all the ones i've researched.

 

[snowman429]

Is it this one? and did it just plug right in?

yes that's the one and yes it just plugged in. I've never had any issues with mine.

 

[tahoermk]

I got one directly from polaris that was plug and play. It was a 5 minute instal and has worked flawlessly. Cheap too. Maybe the slp is a polaris?

 

[kraftymike]

I ran the Pro Armor last year. The switch worked great. I tried several different locations on the bars, but couldn't find a spot where I wasn't getting tied up in the slack or a loop around the bars while ridding. I went with the SLP this year and mounted it on the shroud by the fuel cap. Hope this works better. (These are on PRO's though).