The best snow free tunnel stiffeners with your name on them.

[peterfireblade]

peterfireblade@yahoo.com

RAILS TOO FLIMSY, BENDING, COLLECTING SNOW AND ABSORBING YOUR TURNING INPUT ENERGY ON YOUR SKI-DOO XP.

PETE'S PLATES ARE YOUR SOLUTION. CHECK THESE OUT.

DESIGNED FOR FREESTYLE AND HARDCORE MOUNTAIN RIDING IN DEEP SNOW CONDITIONS.

TWO STYLES TOO CHOOSE FROM SEE PICS ATTACHED. ONE FOR GREATEST STRENGTH AND STOCK LOOK AT WIDEST PART OF FOOTSTEP AREA. TWO FOR STRENGTH AND SNOW SHEDDING DESIGN. BOTH OR EITHER CAN BE USED TOGETHER OR INDIVIDUALLY. WITH BOTH STEP AREA IS RIGID.

PRECISE HYDRO CUT- YOUR NAME OR "HANDLE" ON VERTICAL PLANE.
BEAUTIFUL FIT AND FINISH HYDRO CUT FROM 6061 ALUMINUM PLATE WITH LARGE BEND RADIUS FOR MAXIMUM STRENGTH AND FATIGUE RESISTANCE.
TITANIUM WILL BE AN OPTION SOON BUT ONLY AFTER MORE TESTING HAS BEEN COMPLETED! BRUSHED,POLISHED OR ANODIZED COLOURS.

ALL STAINLESS FASTENERS, INSTRUCTIONS-MOUNTING PROCEDURE SUPPLIED.PRICES START AT $195CAN.

 

[Richard Hall]

Great Product Pete

peterfireblade@yahoo.com

RAILS TOO FLIMSY, BENDING, COLLECTING SNOW AND ABSORBING YOUR TURNING INPUT ENERGY ON YOUR SKI-DOO XP.

PETE'S PLATES ARE YOUR SOLUTION. CHECK THESE OUT.

DESIGNED FOR FREESTYLE AND HARDCORE MOUNTAIN RIDING IN DEEP SNOW CONDITIONS.

TWO STYLES TOO CHOOSE FROM SEE PICS ATTACHED. ONE FOR GREATEST STRENGTH AND STOCK LOOK AT WIDEST PART OF FOOTSTEP AREA. TWO FOR STRENGTH AND SNOW SHEDDING DESIGN. BOTH OR EITHER CAN BE USED TOGETHER OR INDIVIDUALLY. WITH BOTH STEP AREA IS RIGID.

PRECISE HYDRO CUT- YOUR NAME OR "HANDLE" ON VERTICAL PLANE.
BEAUTIFUL FIT AND FINISH HYDRO CUT FROM 6061 ALUMINUM PLATE WITH LARGE BEND RADIUS FOR MAXIMUM STRENGTH AND FATIGUE RESISTANCE.
TITANIUM WILL BE AN OPTION SOON BUT ONLY AFTER MORE TESTING HAS BEEN COMPLETED! BRUSHED,POLISHED OR ANODIZED COLOURS.

ALL STAINLESS FASTENERS, INSTRUCTIONS-MOUNTING PROCEDURE SUPPLIED.PRICES START AT $195CAN.

Please send me a set of the midtunnel ones, send paypal request to richard_hall1@hotmail.com including shipping please.

 

[WhistlerCowboy]

Those look sweet!

 

[summitking]

Any thoughts on adding some traction cleats to the rear stiffner or is it pretty good for traction? is 195 for both the front and rear? when can i get a set

 

[BCAlpinejunkie]

peterfireblade@yahoo.com

RAILS TOO FLIMSY, BENDING, COLLECTING SNOW AND ABSORBING YOUR TURNING INPUT ENERGY ON YOUR SKI-DOO XP.

PETE'S PLATES ARE YOUR SOLUTION. CHECK THESE OUT.

DESIGNED FOR FREESTYLE AND HARDCORE MOUNTAIN RIDING IN DEEP SNOW CONDITIONS.

TWO STYLES TOO CHOOSE FROM SEE PICS ATTACHED. ONE FOR GREATEST STRENGTH AND STOCK LOOK AT WIDEST PART OF FOOTSTEP AREA. TWO FOR STRENGTH AND SNOW SHEDDING DESIGN. BOTH OR EITHER CAN BE USED TOGETHER OR INDIVIDUALLY. WITH BOTH STEP AREA IS RIGID.

PRECISE HYDRO CUT- YOUR NAME OR "HANDLE" ON VERTICAL PLANE.
BEAUTIFUL FIT AND FINISH HYDRO CUT FROM 6061 ALUMINUM PLATE WITH LARGE BEND RADIUS FOR MAXIMUM STRENGTH AND FATIGUE RESISTANCE.
TITANIUM WILL BE AN OPTION SOON BUT ONLY AFTER MORE TESTING HAS BEEN COMPLETED! BRUSHED,POLISHED OR ANODIZED COLOURS.

ALL STAINLESS FASTENERS, INSTRUCTIONS-MOUNTING PROCEDURE SUPPLIED.PRICES START AT $195CAN.

Hey Pete,

For the 2009 XP 163
Can you cut out a flame design instead of a name?

I would like them with an anodized blue finish, with flames in the vertical portion.
How long for the turn around?
How much for the powder coating and the artwork?

 

[peterfireblade]

No Problem

Just tell me where you live and send email of rough art work and i will make it happen, 2-3 wks for those and then we can do the paypal thing. Cheers and thanks for the interest and the order. Peter. O.

 

[peterfireblade]

Summitking

Any thoughts on adding some traction cleats to the rear stiffner or is it pretty good for traction? is 195 for both the front and rear? when can i get a set

I have tried a few different styles or treads or teeth and most Tend to trap ice and snow as its a place for it to sit and get compressed on to footprint area and not easily kicked of due to teeth being there. We have tested with no grip other than the edges of the large cut outs with polished finish with very positive results. In the photos above i have the stainless ny-lok nut facing up they work well to. I used to weld on little triangles of aluminum for teeth but this was not much better and a lot more work. If you want something more custom for your sled i can do it, but will be more money.
I am a week behind in sending any out at moment as a lot of orders since it snowed lots/xmas and all. They are 195 per set, the fronts are 1/4'' and the rear sets are 3/16'' and they are nice and strong.
email me if you want a set and let me know what you want! Cheers and hope you have snow to ride, Peter.

 

[peterfireblade]

Yamaha/Whistler Cowboy

Those look sweet!

Hey i have not made any for a yamaha but i know they need them. I would be quite happy do do a custom design and make a set for you.
I see you do powder coating i may be interested in switching to you to do my pow coating we should chat about this. I am up and down the Sqamish area to go riding so that would be handy. Cheers Peter.

 

[WhistlerCowboy]

I wass thinking the same thing.I just sold the Nytro so no need for a set for that sled.I'll pick up a stock ride soon.Emailed you some info.Dave