THE 900 PARTS COUNTER 2016

[guidoxpress]

Looking for 2 mufflers..one for an 05 900 and one for an 06 900..must be quiet versions. Do NOT want loud cans.

Let me knw what you have


Sent from my iPhone using Tapatalk

 

[02sedona]

05 sled for sale, extra parts too

This is a highly modified sled. It has had all the 05 issues dealt with. It has been reliable, Until the recoil took out a newer stator. I replaced the recoil but not the stator.

Doesn't run currently because of this.

Not looking for trades You can buy someone else's for less but this has more done to it to make it reliable. Many extra parts are included for my price of $1900

Upgrades are
2006 crank and Pistons
Rear motor mounts replaced recently 2006 rubber
Upgraded "Franz" billet motor plate with "compfusion" motor mounts (I have a extra set of compfusion mounts) as well as a stock motor plate/mount.
Franz billet chaincase, mtn gearing installed
Holz/fox coil over rear suspension, Holz two wheel kit, Holz scratchers
Timbersled barkbuster front suspension 38" arms as well as extra 40" arms
Walker Evans air shock revalved by fastrax for the RMK
Slp powder pro skis with Carl's cut
All new tie rod ends and ball joints up front. Steering post has some pivot slop side to side.
4" powermadd bar riser
Gold finger left hand throttle
Skinz seat cover, skinz front bumper, skinz float plate
Timbersled air intake
Slp exhaust can
R&M lightweight mesh hood ( have stock hood painted black too)
2cool mesh side panel vents
Koso dual egt gauge on manifold
Recently replaced the main wiring harness, capacitor, voltage regulator, and ecu
Carb boots replaced recently
Stator replaced recently

Lots of work has gone into this sled and I am probably forgetting a few things that have been done to it. Asking price is $1900. It has current Cali tags.
I have a 2005 Slp pipe for $100

 

[guidoxpress]

Feeler for 05 900 mod part out.

I've been in the Polaris 900 game for quite some time. Slowly getting rid of them

Main reason to part is to spread the goods to other 900 owners not to some 16yr old punk that doesn't knw what he has or how to take care of it.

Below is the parts I'm willing to sell. Price is TBD. But must sell the skid and motor before I remove anything. All the plastic is jacked and not worth buying imo..

Motor has 510 miles on it (Indydan TM3 bottom end) $2000 shipped

Skid (timbersled suspension with 166 rails) $600 shocks have fresh rebuilt as of this morning.

the Indy specialties torque master III crankshaft. If you don't knw what it is, google it now and you will knw you can have the BEST frank ever built. It cost me $3200 plus shipping alone.

Venting
•Longtracks Edge Side Panel Vent Kit
•Dragon dash with Vents
-Mountain Fit Hoods hood vent kit

BODY
•Skinz 09 Front Bumper
•09 IQ Center Console
•09 IQ Front End Conversion
•09 Skid Plate
•Black Smooth bed Lined Tunnel
•Red Powder Coated Engine Support Braces
•Red Powder Coated Recoil Housing
Custom made tube running boards with skins grip strips
•Skinz Rear Bumper
•Black Polaris AXYS handguards & mounts
•Rider Select Delete Kit
•ProTaper Handle Bars
•09 Dragon 90 Degree Bar Hooks
•Fastlane Hood Strap Kit
•Custom UHMW Side Panel "RMK 900"
•Pro-Armor Tether Cord
•Dzus Fastner Kit for Side Panels
•Fastrax Billet Throttle Block
•RSI Hi-Power Grip Heaters
•Billet Pull Handle
•Gripper Skis
•HOLZ Gas Rack
•PowerMadd Extended Brake lever
•AMP Billet Gas Cap
•Mountain Fit Hoods Gauge Lifter
•BOSS seat

Engine
•Indy Specialties Torque Master III billet crankshaft with blueprinted cases. Uses 33mm PTO crank end and Arctic Cat clutch. Came with 5 yr warranty and Lifetime Deal with cost on rebuild.
-'06 pistons with 203 miles on them.
•Custom Billet Chaincase Cover
•'06 Rear Motor Mounts
•'06 front motor mounts
-SLP white exhuast valve springs
•06 SLP Pipe
•06 SLP Y-Pipe
•MBRP Racing Can
•Motion Pro Throttle/Oiler Cable
•HYVO 19/41 and 19/43 Gears
•Royal Purple ATF Chaincase Fluid
•Updated TPS & TPS Wiring Harness
•Armor Cord Heavy Duty Pull Rope
•Fire & Ice Intake
•Red Powder Coated Belt Cover

Suspension
•Fox Floats Skid Shocks
•Fox Float Roost Guards
•Timbersled skid
•Red powder coated rails
•MMP Freedom Axle
•2 MMP 9" Billet Big Wheel Kit
•2 Billet 6" upper Idler Wheels
•ZBROZ 40" Wide A-Arms
•09 HOLZ Billet spindles
•HOLZ Billet Rail Brace
•07-up IQ Steering Boot Covers
•Ice Scratchers
•166" Series IV Track 2.4" Paddles with all windows punched/ported
•Wahl Anti-Stab Kit
•Avid Anti-Rachet Drivers
•Zbroz XO from shocks

Clutching
•Team TSS-04 lightweight Secondary
•58.46.46 Twin Trax Helix
•1 Derlin Washers in Secondary
•SLP Secondary Spring (forgot the dang color)
•3211115 Drive Belt
•Arctic Cat 6 tower Drive Clutch balanced by Indydan and shimmed for the 115 belt
•10-70 clutch Weights
•SLP Blue/Pink Primary Spring
•Red Powder Coated Primary and secondary clutch covers

MISC
•Electric start added
-Fire & Ice headlight delete (plastic is melted slightly)
-Team hard Front shock covers

Sent from my iPhone using Tapatalk