Thank You From MC-XPRESS USA

[APEXXPRESS]

Turbo Time at MCXPRESS USA
The 2015 MTX'S are starting to arrive for Boost

 

[ATVPT]

Yesssssssssssssssssssssssss

 

[opel]

Nice!

 

[APEXXPRESS]

Racers Edge Suspension

I received the new Racer Edge D Motion Suspension today for one of Yamaha Turbo Viper Projects
We need this Suspension to keep the Viper on the ground with the amount of Horsepower we are going to be putting out

Racers Edge D Motion coilover rear suspension arm
couples the rear arm and controls the ride of your sled with a Heim joint so you have a pivoting suspension to aid in side hilling .
Raptor shocks (pair)
- 100% Billet Aluminum Construction
- 100% High Speed CNC Machined to Exacting Tolerances
- Highest Quality Synthetic Blended Fluid
- High Strength Delrin Bushings
- Cutting Edge Computer Aided Design Software
- Cutting Edge Fluid and Thermal Dynamic Modeling Software
- Elegant Lightweight Ground Up Design
- Progressive high flow Piston Design
- Progressive Valve Codes
- Internal Blow Off Valve
- 20 position clicker
- RAP (Rapid Adjust Preload)
- NEST (Seal Technology)

 

[BigFish BC]

best skid madehow much was the full skid

 

[APEXXPRESS]

4500 Cad including shipping to the US

 

[APEXXPRESS]

I received a Limited Edition Viper MTX 162 Today​

 

[christopher]

Can't wait to get mine next week

 

[TRUEBLUEMAX]

Nice sled. I sure wish they put a black tunnel on the red a blue sleds also.


Sent from my iPhone using Tapatalk

 

[APEXXPRESS]

Special MCXpress Yamaha Apex MTX, Twin turbo 500hp!

 

[APEXXPRESS]

Yamaha Apex Twin-turbo dynorun 367hp On Pump Gas

 

[Tarzannr1]

Wow! Woow!! Wooow!!! Supernice!!!!!

 

[APEXXPRESS]

MCXpress Viper MTX 270 Hp Build

Time to start Boosting the New Viper MTX
First step it to lower the compression so we can run pump Fuel and Higher Boost

 

[APEXXPRESS]

MCXpress 2015 Yamaha Viper MTX 270 Hp Build

 

[APEXXPRESS]

MCXpress USA 2015 Viper MTX 190 Hp Turbo Build

MCXpress has built this Turbocharger Kit so that it looks like is came from the Yamaha Factory .
It is very easy to install and runs on Pump Fuel
Unlike one of the other major brand kits, you do not have to remove the coolant or oil lines ,( No Mess)
The air/oil separator and the Thermostat Housing stays in the stock location
You do not have to reroute any wiring harness or remove any of the steering supports.
The plenum has lots of clearance so the hood does not need to cut The Seat does not even have to be removed.
We did install a optional Deep Snow Intake that required cutting the hood to bring large amounts of cool air in.​

 

[APEXXPRESS]

Project Viper 174

Project Viper 174 is now completed and is one bad machine
Can't wait to see this one ripping up the Mountains
Our Viper Project moves Forward,Chad from CR Racing sent down
one of his new Viper Tunnel extensions and set of his Extreme Running Boards
Robbie from Avid Product sent over a set of new Drivers to turn the big 174 x3 track from Western Power Sports
Ron from Powerhouse Customs set up a Racer Edge rear Suspension for the Viper Project.




























174 Viper Project Cylinder Head removal to install Head shim to lower compression. Intercooler and Turbocharger installation










JPS Helping out on Running Board Installation

 

[Givemeaboost]

You're going to need a Viper picture on your trailer..


Ken..............

 

[APEXXPRESS]

You're going to need a Viper picture on your trailer..


Ken..............

Good Point Ken !

 

[APEXXPRESS]

Thunderstruck Build #1

Thunderstruck Rider Matt Losey picks up his New MCXpress Viper
Must give a Big Thanks to everybody for helping support these Thunderstruck Projects. Yamaha Motor Corporation , Rob Powers, Erik Marklund MCXpress Sweden ,KLIM, Skinz, Arctic FX and more that we will name in our next builds . Also the Thunderstruck Crew and Jim Phelan for putting this all together

 

[APEXXPRESS]

MCXpress Viper 270Hp

Jake Shupe Rippin another Hill on his MCXpress Viper !