Team TSS04 on RT 1000 Summit

[BBP]

Anybody have a good setup? 3000-7000'

 

[Ckale]

Have you looked up team's reccomendations for your setup/elevation? They should tell you everything you need.

Heres their chart, your specs are on page 4

http://teamaftermarket.com/images/u...ations/Tuning_Recommendations_for_Ski_Doo.pdf

You will have to write down the part numbers that they reccomend, then search around and see what each part is, spring rates, helix angles, etc...

 

[BBP]

Years back I ran Teams recommendations in my 04. It was very lazy in the heavy powder we have. I went through a couple of helixes & different springs, wts, ect to get it right. This 1000 isn't my sled & I want to get it right the first time, or at least close. The helix team recommends is a 48-44F 48-42F. None of my distributors carry it. So i guess I'm looking for a proven setup, preferably with a more common helix. Thanks for replying.

 

[Ckale]

Yeah I had the same problem, they no longer make the reccomended helix for my Tss-98, so im experimenting with other helix's and stuff. Did you have an 04 summit?

 

[Ckale]

What did you find to work best on your 04?

 

[summit1k]

I think bikeman performance has a setup for it. I have the clutch but need to get the kit for it. I tried the team helix/spring and it was not right. It still needed some modification on the primary.

 

[YZ426F]

On mine I was running a straight cut 44 with one of they're heavy springs. Not sure of the spring rate. That was with a 162 2.5 track and 2000 to 6000 in elevation.