T.O.R.S. on 08 Nytro

[bumblebeast]

How do you bipass it? It looks like according to the wiring diagram that you ground the black and yellow wire.

 

[funjunkie]

You can just unplug it at the handle bar wiring harness cut the plug and some wire of the handle bar end and twist the wires together and put a cap contector on the wires and plug it back in

 

[bumblebeast]

According to the wiring diagram there is only one wire on the nytro and that is the black and yellow wire that has the connector down on the left side of the headlight. there is not two wires in the connector to splice together!

 

[funjunkie]

Sorry there is two plugs with one wire each. twist those together . I just started my sled and started unpluging wires untill i found the write ones .

 

[snowy1]

Sorry there is two plugs with one wire each. twist those together . I just started my sled and started unpluging wires untill i found the write ones .

this is right two plugs with one wire unplug both and plug them into each other its that simple.

 

[bumblebeast]

thanks a bunch I'll give it a try