Supreme Tool Secondary feedback wanted

[Nate]

My 11" stm secondary has already paid for itself just in belt cost alone at $120 a belt. Not a single belt failure last year with it on a m1000.

Nate dont be getting me in trouble while I am gone this weekend.

As for the head, I new better. Nothing but speedwerx from here on out.

One more thing the STM gas valve conversion for the m1000 is nothing short of awesome.

Next year should be a good year indeed my man I have a feeling ill just keep the sled at your house all the time heheheheheheh

 

[AKpow]

ttt

Anyone have this setup on a M8 at 0' to 5,000'
Looking for what people are using for a helix and springs and if you had to regear the DD.

10.6 or 11?

Does the 11" really drop into a 07 or newer sled

damn all these questions.

I cracked the stock sheave, so i am looking to replace the whole secondary instead of buying new sheaves and a RKT or Cutlers kit.

 

[Scott]

Have a 11" of my m1000, not much use, have four different helix's with, good conditions, for sale.. open to offers....

Uhhhh anyone know what diameter the old style kitty roller clutches are?

 

[AKpow]

Pretty sure they are 10"

 

[Scott]

Wonder if I can use the same belt on an 11" secondary without having to go crazy on the shims.

 

[sidehill]

Uhhhh anyone know what diameter the old style kitty roller clutches are?

10 3/8" unless it is off of a bearcat then its a 11"

No the same belt will not work. Needs to be a 1" to 1 1/2" longer, also a little wider to be able to pull any kind of overdrive.

 

[Scott]

I have a LONG belt already from a 97 mxzx or something like that. (I have an RMI drive) It's already fairly tight as it is.
http://supremetoolinc.com/cart/tuner-secondary-p-31.html
http://supremetoolinc.com/cart/images/40 -TUNER SECONDARY RED.jpg